5 lug to center lock
#16
Rennlist Member
Yes CL is a pain when comes to finding an indy tire shop for servicing. I would guess about 90% of the indies can't do it. I bought myself an expensive and bulky portable torque wrench to carry for long trips out of the fear that no one can install my wheel in an emergency. It takes precious frunk space and barely fits.
Try America's Tires for servicing CL because some of them have the big torque wrench for servicing big commercial truck wheels. Even so you should be well versed in the proper installation of CL such as proper torque value and making sure the CL nut gear teeth pops out while reaching the proper torque to ensure safety. America's Tires' database indicated 368# for my 911 GTS and that is far from the 444# spec'd by the manual. Luckily the tech was willing to deviate with my instructions. It would be prudent to supply your own Castrol Optimoly paste to lube the nut because the shop probably will not have any. You need to watch the shop tech to make sure they did it right as they may not be familiar with the Porsche CL system. Simply torque to the spec is not enough. Remember you only have one bolt for that wheel! Lastly, once your tech does it right always try to get him again next time. I also tip him so I know he'll give it special attention.
The morale of this long winded post is that you need to know how to install CL correctly because you can't depend on others to do it unless it's a Porsche dealer or a Porsche indy shop.
With that being said, yes CL does look very cool and it is a lighter wheel with lower rotating weight that goes toward enhancing performance and feel.
Try America's Tires for servicing CL because some of them have the big torque wrench for servicing big commercial truck wheels. Even so you should be well versed in the proper installation of CL such as proper torque value and making sure the CL nut gear teeth pops out while reaching the proper torque to ensure safety. America's Tires' database indicated 368# for my 911 GTS and that is far from the 444# spec'd by the manual. Luckily the tech was willing to deviate with my instructions. It would be prudent to supply your own Castrol Optimoly paste to lube the nut because the shop probably will not have any. You need to watch the shop tech to make sure they did it right as they may not be familiar with the Porsche CL system. Simply torque to the spec is not enough. Remember you only have one bolt for that wheel! Lastly, once your tech does it right always try to get him again next time. I also tip him so I know he'll give it special attention.
The morale of this long winded post is that you need to know how to install CL correctly because you can't depend on others to do it unless it's a Porsche dealer or a Porsche indy shop.
With that being said, yes CL does look very cool and it is a lighter wheel with lower rotating weight that goes toward enhancing performance and feel.
#17
Instructor
I was debating if I need to buy all these tools just in case of a flat in the middle of the road.
Doesn't dealership charges some outrageous price/install to change tires? How competitive is their pricing compare to independent Porsche shop?
Doesn't dealership charges some outrageous price/install to change tires? How competitive is their pricing compare to independent Porsche shop?
#18
OP - Be happy that you don't have to deal with the headaches involved with a CL. If you really want them that bad, you're much better off selling the car and buying a GTS/GT3/Turbo
#19
Burning Brakes
I think it's a foolish move to select 5 lug on a landmark car like the .1 GTS unless you're tracking monthly. Like ordering a GT3 then taking the wing off. Get a C2S if you don't want the what, 8k wheels that come stock?
The 991 has to go somewhere special and or be flatbedded if you have that serious of a puncture anyway. It's not like a repair shop in the sticks is gonna safely work on your 20" wheels. Ymmv
The 991 has to go somewhere special and or be flatbedded if you have that serious of a puncture anyway. It's not like a repair shop in the sticks is gonna safely work on your 20" wheels. Ymmv
#21
Instructor
Join Date: Dec 2012
Location: S.E. Wisconsin, U.S.A.
Posts: 234
Likes: 0
Received 5 Likes
on
4 Posts
Sorry, can't help directly, but I can add something. I read a thread on a 997 forum awhile back from a guy who made the switch in the other direction...that is, he swapped out his CLs for 5-bolts. He was sick of dealing with the CLs, and made the switch in spite of everyone warning him that he would be adding a lot of unsprung weight by doing so. He returned an argument that pointed out that all of the difference in weight occurs at the center of the wheel, so any change in "flywheel effect" would be inconsequential. Then he made a point of weighing everything while doing the swap, and guess what...when all the dust settled, the weight difference was so close to a wash that it wasn't even worth talking about. I'm sorry that I can't remember the actual figures, but the weight difference was seriously not a concern...I mean, something on the order of 1 pound per corner. I think he made the comment that he could (but wouldn't) make up the difference with titanium lug bolts, if it was that important. He was thrilled with the result of his swap. Obviously, YMMV.
#23
Rennlist Member
#25
You got that right...+1 They are a PITA compared to swapping a 5 lug. Check out Orthojoe's avatar for an idea of the torque wrench needed.
#26
Rennlist Member
I wish I had his body mass. I have pulled, sat, jumped and still can't get the damn things torqued. I HATE cl's beyond description. Rant over.
#27
Pro
CL = more pain. This is just Porsche way of making sure clients come to their shops only. This is not the CLs used in club race cars. I am really crossing my fingers for easy CLs or just tons of 5-lug wheel options when the 992 comes.
#28
I did the same. CL's for the street are, for me, strictly a cosmetic illusion for those who want the "look". Your street car will never, ever really need CL's. It's a little like fitting air jacks--great on a race car, but on the street no matter what GT-variant you drive, the car is still hundreds of pounds heavier that real track cars.
#29
I have CLs. I really like them. I've had no trouble with changing them. Having said that, if my car had 5 lug, I wouldn't attempt to change them to CLs. I just feel like something that crucial to the initial build of the car shouldn't be messed with..
#30
Hi, I am going to go to CL on my 997 C4s. Can someone please advise on wheel size if I wanted to chose to go to a 20" wheels - CL 991 wheels or is this not even an option for a 997 C4s gen 1?
What Issues will I encounter?
What Issues will I encounter?