What did you buy your 991 today thread
#1412
I ordered it online at mods4cars.com
The installation took less than 30 min. It was easy to get everything apart. The only tricky part was getting the wiring harness connected because you had to do it by feel and there is a little plastic locking tab. I left the USB cable connected and ran it up under one of the "lids" so I could easily attach my computer and tweak the configuration.
All of the features work - exactly as specified.
The installation took less than 30 min. It was easy to get everything apart. The only tricky part was getting the wiring harness connected because you had to do it by feel and there is a little plastic locking tab. I left the USB cable connected and ran it up under one of the "lids" so I could easily attach my computer and tweak the configuration.
All of the features work - exactly as specified.
#1413
Instructor
First, I have never removed the front cover before so I was careful. Second, I did not jack up the car or remove the wheels. All that took a bit longer than I desired, especially with the AeroCup front and SPASM which is much lower. The removal took about an hour and half. Reassembly took about 45 minutes. The install of the grills in the bumber cover took about 15 minutes. I found the You Tube video's very helpful, except there are areas that caused me to waste some time such as trying to locate the electrical connection and then trying to access it from its mooring. The other area was reinstalling. The bumper went in fine and all holes lined up except the bottom left area did not seat properly and I had to partially remove it to fold the bottom plastic shield into the cover properly.
All in all not a terribly difficult DIY and probably saved $500-$600 in dealer labor. The Rennline parts fit very nicely and are well made. I would recommend this modification to protect the radiators.
All in all not a terribly difficult DIY and probably saved $500-$600 in dealer labor. The Rennline parts fit very nicely and are well made. I would recommend this modification to protect the radiators.
#1414
991 Dreamer - The SmartTop installation was easy and only took about an hour. The toughest part was connecting the wiring harness because you had to do it by feel and there is a little locking tab that kept getting in the way. I left the USB cable connected and ran it up under one of the “lids” so I can easily reconnect my computer and disable the system or change the configuration. Everything is working great - as expected.
I ordered the SmartTop from the mods4cars website and it arrived within a few days.
I ordered the SmartTop from the mods4cars website and it arrived within a few days.
#1415
Rennlist Member
If you have some time, post a pic of your grills installed. The Rennline grills looks as good as the OEM on the GT3.
#1416
Three Wheelin'
Here's a link that explains how....
http://www.mods4cars.com/sms/db/smar...n_v1.1x/en.php
#1418
Instructor
Took more time to clean out the area just in fron thof the radiators than to install the grilles. There were A LOT of little pebbles. Maybe an eighth of a cup each side!
#1419
Rennlist Member
#1420
How did you clean it out? I tried using a compressed air keyboard duster. Got some out but not everything.
#1421
#1422
Instructor
#1424
Rennlist Member
Something wicked this way comes...
20x9" and 20x12" HRE P101s, brushed with clear powdercoat and red logo, aggressive offsets front and rear
Tikore Titanium Bolts
Pilot Sport 4S's
The first time I've gotten aftermarket wheels in 30 years so now I'm really anxious to get them mounted and see them on the car! I'll post some photos of that later.
20x9" and 20x12" HRE P101s, brushed with clear powdercoat and red logo, aggressive offsets front and rear
Tikore Titanium Bolts
Pilot Sport 4S's
The first time I've gotten aftermarket wheels in 30 years so now I'm really anxious to get them mounted and see them on the car! I'll post some photos of that later.
#1425
Rennlist Member
Something wicked this way comes...
HRE P101s, brushed with clear powdercoat and red logo
Tikore Titanium Bolts
Pilot Sport 4S's
The first time I've gotten aftermarket wheels in 30 years so now I'm really anxious to get them mounted and see them on the car! I'll post some photos of that later.
HRE P101s, brushed with clear powdercoat and red logo
Tikore Titanium Bolts
Pilot Sport 4S's
The first time I've gotten aftermarket wheels in 30 years so now I'm really anxious to get them mounted and see them on the car! I'll post some photos of that later.
Hot damn! Cant wait to see pics!