Rollbar and seats installed
#16
Thanks for your feedback.
#18
Rennlist Member
Thread Starter
Yep. Will get coding soon.
#19
Three Wheelin'
Great set-up, and impressive that you can use the car as a DD even when outfitted like this during track season! Perhaps now that the calendar is about to flip to April the snow will be gone for good (today in LI was a bit of a surprise) and you'll be able to hit the track soon!
#20
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Paradocs,
Great to see that you got the bar installed. Your car looks beautiful! Thanks again for the purchase and doing an honest write up!
-Jerry
Great to see that you got the bar installed. Your car looks beautiful! Thanks again for the purchase and doing an honest write up!
-Jerry
__________________
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
#21
#23
Three Wheelin'
#24
Drifting
My master tech said it shouldn't be a problem... I'm checking out the bbi cage Serge as as well (SM_ATL). I think I'll order it, have it painted guards red, and have it install it. Worst case scenario (if its a tight fight with the stock seats) I have to buy new seats.
#25
Rennlist Member
Thread Starter
Should be fine. It better be fine--I plan on putting the stock heated seats back in for winter around November. I'm 6'2" with relatively long legs and it's fine with the OMP seats. Plenty of room. They can move back even more on the sliders without contacting the rollbar.
#26
Drifting
Should be fine. It better be fine--I plan on putting the stock heated seats back in for winter around November. I'm 6'2" with relatively long legs and it's fine with the OMP seats. Plenty of room. They can move back even more on the sliders without contacting the rollbar.
#27
Drifting
Yep--HTE-R 400 for driver, which has halo. WRC for passenger.
Mounting points for harnesses or for seats or for rollbar? The sub-strap is mounted to a Brey-Krause bar under the seat. Based on advice from my shop, we didn't want to start drilling the floorpan to do mounting plates--too many lines, etc., running through there. The seats are bolted to the floor, on Recaro sliders and Planted side mounts on the driver's side, and Brey-Krause side mounts on the passenger side. The GMG bar is bolt-in, not welded. Goes to outer seat belt mounts and rear suspension mounts.
Mounting points for harnesses or for seats or for rollbar? The sub-strap is mounted to a Brey-Krause bar under the seat. Based on advice from my shop, we didn't want to start drilling the floorpan to do mounting plates--too many lines, etc., running through there. The seats are bolted to the floor, on Recaro sliders and Planted side mounts on the driver's side, and Brey-Krause side mounts on the passenger side. The GMG bar is bolt-in, not welded. Goes to outer seat belt mounts and rear suspension mounts.
#28
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Rennlist members,
The roll bar is designed to work with stock seats and you can still have plenty of seat travel like our LMS bars for the 996 and 997.
The fitting is really right but this is the first batch of bars. We will make some minor revisions to make the install a little easier for the next batch of roll bars.
-Jerry
The roll bar is designed to work with stock seats and you can still have plenty of seat travel like our LMS bars for the 996 and 997.
The fitting is really right but this is the first batch of bars. We will make some minor revisions to make the install a little easier for the next batch of roll bars.
-Jerry
#29
Drifting
Rennlist members,
The roll bar is designed to work with stock seats and you can still have plenty of seat travel like our LMS bars for the 996 and 997.
The fitting is really right but this is the first batch of bars. We will make some minor revisions to make the install a little easier for the next batch of roll bars.
-Jerry
The roll bar is designed to work with stock seats and you can still have plenty of seat travel like our LMS bars for the 996 and 997.
The fitting is really right but this is the first batch of bars. We will make some minor revisions to make the install a little easier for the next batch of roll bars.
-Jerry
#30
Rennlist Member
OP, I have the same halo seats in my race / de / street car, there are seats with removable halo pieces but I was surprised at how they did not bother on street driving.
Served me well when I crashed
Served me well when I crashed