Keebins Agate build
#31
#32
im running apex wheel sizing for narrow body 991.2 along with 265/35 19’s and 315/30/19 rears. I’m looking to sell these as i want to get some e88’s.
#33
#34
If I were to do it again I would try and make a GT2 RS setup work. I know someone did go that route but I can’t remember who or the final outcome.
Your cars looking good and can’t wait to get on track this year.
The following users liked this post:
keebin (01-25-2023)
#35
The sports design rear spoiler gets my vote, subtle form and function and a quick install, easy to go big later. The Tech-art wing is a huge job in comparison with no documented proof of improved aero or cooling. I wish I had measured air flow and temps on mine before removing. I wouldn’t be surprised if it’s has improved cooling but that’s just anecdotal without the data. The kit doesn’t fit out of the box and although it is pretty good quality it’s not OEM. The spoiler over ride box under the seat is a PITA and mine failed twice.
If I were to do it again I would try and make a GT2 RS setup work. I know someone did go that route but I can’t remember who or the final outcome.
Your cars looking good and can’t wait to get on track this year.
If I were to do it again I would try and make a GT2 RS setup work. I know someone did go that route but I can’t remember who or the final outcome.
Your cars looking good and can’t wait to get on track this year.
#36
i have zero wanting to measure this thing lmao it’s low with out rubbing and i track it at this height. But you’ll want some decent coil overs and some arms to get to get the results. I’m running about 3.3 degrees up front of camber and 2.5 out back and if you look at my cars side profile you get an idea of where you would want you’d the ride height.
#37
Very nice setup and the car looks amazing. Similar in stance to mine. I do however rub on driveways and on the back roads occasionally when I’m making a hard turn. I’m gonna raise it a few cm. Also looking into control arms to get more camber.
It would be really nice to see your car in person and the setup. I would like to go to 19s but the 20s just look so good and going lower might rub more.
It would be really nice to see your car in person and the setup. I would like to go to 19s but the 20s just look so good and going lower might rub more.
#38
i have zero wanting to measure this thing lmao it’s low with out rubbing and i track it at this height. But you’ll want some decent coil overs and some arms to get to get the results. I’m running about 3.3 degrees up front of camber and 2.5 out back and if you look at my cars side profile you get an idea of where you would want you’d the ride height.
#39
Finally found a set of 19 inch e88’s couple weeks ago. I added some Essex’s racing two pieces rotors as well along with a factory aero wing and front bumper. I’m debating if i should ditch my 18 way seats for buckets. This has been a fun little build i love this car.
Last edited by keebin; 07-17-2023 at 07:45 PM.
The following 4 users liked this post by keebin:
#42
Figure i would update my thread since it’s been a while and I’ve done more with the car. I decided i was bored of the OEM aero kit wing and wanted a tech art wing. This wasn’t a fun install, poor instructions. But my friends came by and helped me install it.
I found a deal on a GT3 seat delete. I also pulled out more sound insulation as well. Doing the mod you get a lot of sound back. Also i can still put my baby seat in the back!
I moved on to adding more power. I really liked all the Tial stuff. I added a BMC filter, Tial inlets and Mimo/Tial 3d printed turbo elbows. These are relatively easy to install especially if you have quick jacks at home. I’m mentally preparing to just swap the turbos to m660’s lol.
I added Titanium exhaust tips to replace my oem black sport exhaust tips.
i added a few more things but I’ll update at a later point. I also added a Sharkwerks exhaust with Soul hi flows.
I found a deal on a GT3 seat delete. I also pulled out more sound insulation as well. Doing the mod you get a lot of sound back. Also i can still put my baby seat in the back!
I moved on to adding more power. I really liked all the Tial stuff. I added a BMC filter, Tial inlets and Mimo/Tial 3d printed turbo elbows. These are relatively easy to install especially if you have quick jacks at home. I’m mentally preparing to just swap the turbos to m660’s lol.
I added Titanium exhaust tips to replace my oem black sport exhaust tips.
i added a few more things but I’ll update at a later point. I also added a Sharkwerks exhaust with Soul hi flows.
The following 2 users liked this post by keebin:
Speed2k (02-18-2024),
thesaintusa (03-09-2024)
#43
Figure i would update my thread since it’s been a while and I’ve done more with the car. I decided i was bored of the OEM aero kit wing and wanted a tech art wing. This wasn’t a fun install, poor instructions. But my friends came by and helped me install it.
I found a deal on a GT3 seat delete. I also pulled out more sound insulation as well. Doing the mod you get a lot of sound back. Also i can still put my baby seat in the back!
I moved on to adding more power. I really liked all the Tial stuff. I added a BMC filter, Tial inlets and Mimo/Tial 3d printed turbo elbows. These are relatively easy to install especially if you have quick jacks at home. I’m mentally preparing to just swap the turbos to m660’s lol.
I added Titanium exhaust tips to replace my oem black sport exhaust tips.
i added a few more things but I’ll update at a later point. I also added a Sharkwerks exhaust with Soul hi flows.
I found a deal on a GT3 seat delete. I also pulled out more sound insulation as well. Doing the mod you get a lot of sound back. Also i can still put my baby seat in the back!
I moved on to adding more power. I really liked all the Tial stuff. I added a BMC filter, Tial inlets and Mimo/Tial 3d printed turbo elbows. These are relatively easy to install especially if you have quick jacks at home. I’m mentally preparing to just swap the turbos to m660’s lol.
I added Titanium exhaust tips to replace my oem black sport exhaust tips.
i added a few more things but I’ll update at a later point. I also added a Sharkwerks exhaust with Soul hi flows.
The following users liked this post:
keebin (02-21-2024)
#44
They replaced so many bits that they got sick of it and said it was the gift that kept on giving. It was the crap that kept on rattling. I took it all off, and replaced with E-Motion. Not a single noise ever. Bot even after almost 3 years tracking and dailying the E-Motion. Elephant Ratyling bars are junk. It was a complete waste of money. And for anyone that wants to say different I have video showing the slop and rattle. I still have all of them, but they should go in the garbage can.
The following users liked this post:
F355bob (02-18-2024)
#45
I’m sorry but they are pure ****. Every single piece failed and rattled and drive me nuts.
They replaced so many bits that they got sick of it and said it was the gift that kept on giving. It was the crap that kept on rattling. I took it all off, and replaced with E-Motion. Not a single noise ever. Bot even after almost 3 years tracking and dailying the E-Motion. Elephant Ratyling bars are junk. It was a complete waste of money. And for anyone that wants to say different I have video showing the slop and rattle. I still have all of them, but they should go in the garbage can.
They replaced so many bits that they got sick of it and said it was the gift that kept on giving. It was the crap that kept on rattling. I took it all off, and replaced with E-Motion. Not a single noise ever. Bot even after almost 3 years tracking and dailying the E-Motion. Elephant Ratyling bars are junk. It was a complete waste of money. And for anyone that wants to say different I have video showing the slop and rattle. I still have all of them, but they should go in the garbage can.