A different take on a rear seat delete
#16
Definitely following this thread.
#17
Not many options for rear seat deletes for cars without black interiors. I bought a used tub off ebay and had it custom upholstered in aclentera. I still have the original so it is completely reversible. Total cost was around 1K. I didn't bother removing the seatbelt straps.
The following users liked this post:
Viper1000 (01-15-2022)
#18
burnurass, looks like you have the Porsche Jr Car Seat. Why did you need to remove your rear seats? My Porsche Jr Car Seat fit without a problem in the back of my 2014 C2 Cab (unlike most other car seats from Greco or the other major car seat companies). Also, when your kids are a little older and can get by with a booster seat, do you plan on reinstalling the rear seats?
#19
burnurass, looks like you have the Porsche Jr Car Seat. Why did you need to remove your rear seats? My Porsche Jr Car Seat fit without a problem in the back of my 2014 C2 Cab (unlike most other car seats from Greco or the other major car seat companies). Also, when your kids are a little older and can get by with a booster seat, do you plan on reinstalling the rear seats?
#20
__________________
Evan Winstead | Internet Parts Director
Shop & SAVE on Genuine OEM Porsche Parts, Accessories & Driver's Selection!
Contact Us · Shop Audi & BMW Parts too!
Evan Winstead | Internet Parts Director
Shop & SAVE on Genuine OEM Porsche Parts, Accessories & Driver's Selection!
Contact Us · Shop Audi & BMW Parts too!
#21
#22
Will update the First post with this info!
#28
Yes, the seller I purchased it from stated its a 991.2 GT2RS/GT3RS Alcantara CXX rear stray.
Same part number as the one posted here.
This is a very interesting piece to me because I have not really ever seen this installed on a car aside from this thread. All the photos I see of the .2 RS interiors have complete "rear seat delete" panel with carpeting. This piece lays on top of the original carpeting and bolts in the same center screw the lower seat pad is secured too.
Anyhow I got it installed. The Alcantara is a shade off from the center arm rest on mine at least. Not sure, perhaps a manufacturer variation since I also have dash end covers in alcantara which don't fully match what came inside the rest of the car.
100% better than the exposed metal and center bolt screw look!
OP, Thanks for the information
Same part number as the one posted here.
This is a very interesting piece to me because I have not really ever seen this installed on a car aside from this thread. All the photos I see of the .2 RS interiors have complete "rear seat delete" panel with carpeting. This piece lays on top of the original carpeting and bolts in the same center screw the lower seat pad is secured too.
Anyhow I got it installed. The Alcantara is a shade off from the center arm rest on mine at least. Not sure, perhaps a manufacturer variation since I also have dash end covers in alcantara which don't fully match what came inside the rest of the car.
100% better than the exposed metal and center bolt screw look!
OP, Thanks for the information
The following users liked this post:
burnurass (01-15-2022)
#29
Anyone have part number for the little 'mat'?
Thanks guys! Got mine today, after being told there was no stock anywhere in the world and it could be a few months it took only two weeks.
Has anyone been able to determine the PN for the little mat that would cover the nut?
Has anyone been able to determine the PN for the little mat that would cover the nut?
#30