Notices
991 2012-2019
Sponsored by:
Sponsored by:

Zunnsport Grille Issue

Old 03-04-2021 | 08:32 AM
  #1  
Alc's Avatar
Alc
Thread Starter
Racer
 
Joined: Oct 2019
Posts: 482
Likes: 540
Default Zunnsport Grille Issue

991.2 owners, have any of you installed the Zunnsport grilles and have binding on the electric louvers? I opened my car today to get something out and my left side motor tried to run for about 5 minutes. Using an Allen wrench I pulled the grille out a little but it didn’t fix the issue. Did other rennlisters just disconnect the motor?
Old 03-04-2021 | 10:07 AM
  #2  
felo001's Avatar
felo001
Intermediate
 
Joined: May 2016
Posts: 41
Likes: 13
Default

I have installed the grilles on my 991.2S and the louvers are working fine. No need to disconnect the motor. You might have your left Zunnsport grilles a bit bend and it is messing with your louvers. Take a closer look and check the shape of the grill.

These Zunnsport grilles are designed to let the louvers
Old 03-04-2021 | 11:15 AM
  #3  
DaveGee's Avatar
DaveGee
Rennlist Member
 
Joined: Jul 2012
Posts: 1,530
Likes: 487
From: SoCal
Default

Originally Posted by felo001
I have installed the grilles on my 991.2S and the louvers are working fine. No need to disconnect the motor. You might have your left Zunnsport grilles a bit bend and it is messing with your louvers. Take a closer look and check the shape of the grill.

These Zunnsport grilles are designed to let the louvers
+1 What he said.

The center grill fitment is crap, but that’s another story.

DaveGee
Old 03-04-2021 | 04:32 PM
  #4  
BSO's Avatar
BSO
Three Wheelin'
 
Joined: Sep 2018
Posts: 1,495
Likes: 556
Default

I installed the three grills and they do have issue with QA, they do not match in shape, I had to bend mine.

Wouldn't buy them again as their support sucks. They don't interfere withe active slats on mine.

Some have removed the slats but left the mechanism in place.


Thread Tools
Search this Thread
Quick Reply: Zunnsport Grille Issue



All times are GMT -3. The time now is 08:38 PM.