When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The rear valance allows you to use GT3 / GT3RS or GT3 compatible exhausts on the Carrera rear bumper.
it converts the PSE valance insert to a center exit insert.
Its 3D printed in AL. Can be painted all black or black and silver ( as pictured )
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available ** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
Do it properly. Go to a commercial audio rental place (most music instruments store also do) and rent a good quality microphone with a huge wind protector and a digital recorder.
Put that cell phone away, it’s crap.
When recording:
- If standing still, keep the microphone at least 12 to 15 feet away. That’s how you capture the bass in the spectrum.
- if doing drive-bys, make sure that the closes the car gets to the microphone (when the car passes in front) it’s still at least 9 feet away.
- do a cabin recording with the microphone in the middle of the car, halfway between the ears of the driver and passenger.
Do it properly. Go to a commercial audio rental place (most music instruments store also do) and rent a good quality microphone with a huge wind protector and a digital recorder.
Put that cell phone away, it’s crap.
When recording:
- If standing still, keep the microphone at least 12 to 15 feet away. That’s how you capture the bass in the spectrum.
- if doing drive-bys, make sure that the closes the car gets to the microphone (when the car passes in front) it’s still at least 9 feet away.
- do a cabin recording with the microphone in the middle of the car, halfway between the ears of the driver and passenger.
I was talking about the trim piece in the center of the valance.