Notices
991 2012-2019
Sponsored by:
Sponsored by:

Warped Door Panels / 2014 991.1

Thread Tools
 
Search this Thread
 
Old 10-15-2023, 04:50 PM
  #106  
911Mann
Advanced
 
911Mann's Avatar
 
Join Date: Sep 2021
Location: Westchester County, NY
Posts: 72
Received 17 Likes on 11 Posts
Default

Originally Posted by HardRider
Glad I found this thread. Mine are also loose/seperating but under CPO so Porsche can pay for them this time...
Problem is, you're going to have the same problem with the replaced panels within 2 - 5 years. The replacement panels are not a new, improved design. It's the same crap with the same deficient glue you have in there now.
The following users liked this post:
GSBruce (11-19-2023)
Old 10-15-2023, 04:59 PM
  #107  
HardRider
Racer
 
HardRider's Avatar
 
Join Date: Dec 2022
Posts: 439
Received 182 Likes on 124 Posts
Default

I probably sell before then. Truth be told didnt know they were warping till i went and pushed on them. completely delaminated across top. My seat also has some small movements that needs checked out.
Old 10-16-2023, 06:50 PM
  #108  
The Roon
Rennlist Member
 
The Roon's Avatar
 
Join Date: May 2023
Location: Central TX
Posts: 120
Received 20 Likes on 15 Posts
Default

I contacted Pedro, and his website prices are up to date. I believe it was $750 a panel and that's with shipping.
All you have to do is contact them, buy a tv box from HD or Lowes, pack it up and send it.
Check out his websites, he explains how to remove the panel...4 screws, and his prices are there too.

Mine are in the beginning stages of being warped, my CPO warranty expires in NOV. The dealer told me it would cost $2,400 per panel...I said ok, hold on, I'll call you right back!
For what Pedro offers, you can't beat it...and you can't beat his warranty either...check him out!

Oh, I did not have mine done yet, but I will soon enough as the weather gets bad and the roads get slippery.
Old 10-16-2023, 10:06 PM
  #109  
HardRider
Racer
 
HardRider's Avatar
 
Join Date: Dec 2022
Posts: 439
Received 182 Likes on 124 Posts
Default

$750 a panel to apply some adhesive and clamp with some wood. Guy on youtube did with liquid nails, he updates every couple years, still holding strong.
Old 10-17-2023, 07:15 AM
  #110  
The Roon
Rennlist Member
 
The Roon's Avatar
 
Join Date: May 2023
Location: Central TX
Posts: 120
Received 20 Likes on 15 Posts
Default

Originally Posted by HardRider
$750 a panel to apply some adhesive and clamp with some wood. Guy on youtube did with liquid nails, he updates every couple years, still holding strong.
Yes, and my point is we have options to choose from.
Old 11-19-2023, 12:37 PM
  #111  
GSBruce
Intermediate
Thread Starter
 
GSBruce's Avatar
 
Join Date: Sep 2014
Location: The Woodlands, Texas
Posts: 35
Received 45 Likes on 15 Posts
Default

It is not $750 per panel, it is $299-$499 per panel. The price range varies depending on the extent of the "normal" damage and or presence of other damage due to previous repair attempts.

My original, Pedro's Mark I, panel repair cost $250 per panel, plus my costs to box up and ship to Pedro's in February, 2020. My warranty, Pedro's Mark II, repair in June, 2021 cost nothing.

Last edited by GSBruce; 11-19-2023 at 12:44 PM.
The following users liked this post:
911Mann (11-19-2023)
Old 11-19-2023, 02:03 PM
  #112  
911Mann
Advanced
 
911Mann's Avatar
 
Join Date: Sep 2021
Location: Westchester County, NY
Posts: 72
Received 17 Likes on 11 Posts
Default

Originally Posted by GSBruce
It is not $750 per panel, it is $299-$499 per panel. The price range varies depending on the extent of the "normal" damage and or presence of other damage due to previous repair attempts.
That's correct. IDK where this "$750" figure came from.
Old 11-19-2023, 05:38 PM
  #113  
The Roon
Rennlist Member
 
The Roon's Avatar
 
Join Date: May 2023
Location: Central TX
Posts: 120
Received 20 Likes on 15 Posts
Default

Originally Posted by 911Mann
That's correct. IDK where this "$750" figure came from.
I saw it on Pedro's website.
Old 11-19-2023, 06:35 PM
  #114  
GSBruce
Intermediate
Thread Starter
 
GSBruce's Avatar
 
Join Date: Sep 2014
Location: The Woodlands, Texas
Posts: 35
Received 45 Likes on 15 Posts
Default

Originally Posted by The Roon
I saw it on Pedro's website.
Here is what is on Pedro's website:



And also:



Last edited by GSBruce; 11-19-2023 at 06:40 PM.
The following users liked this post:
911Mann (11-19-2023)
Old 11-19-2023, 06:56 PM
  #115  
911Mann
Advanced
 
911Mann's Avatar
 
Join Date: Sep 2021
Location: Westchester County, NY
Posts: 72
Received 17 Likes on 11 Posts
Default

Maybe the $750 came from 2 panels plus shipping, which would be about right.
Old 11-20-2023, 07:18 AM
  #116  
The Roon
Rennlist Member
 
The Roon's Avatar
 
Join Date: May 2023
Location: Central TX
Posts: 120
Received 20 Likes on 15 Posts
Default

Originally Posted by 911Mann
Maybe the $750 came from 2 panels plus shipping, which would be about right.
That might have been it, as I emailed Pedro to ask if the prices on his website was updated, and he said it was.
And I was looking to do both panels however, I can't remember exactly what it was, I'll need to look up my email.

GSBruce, that Carrera in your avatar looks like the one I had back in 2005, except I did the Bumperette delete....dayum, I miss that car!
Looks Great!
Old 11-20-2023, 09:31 AM
  #117  
jdoc1949
Rennlist Member
 
jdoc1949's Avatar
 
Join Date: Jun 2015
Location: Covington,KY
Posts: 657
Likes: 0
Received 27 Likes on 22 Posts
Default

Just had mine done by pedro, great job



Quick Reply: Warped Door Panels / 2014 991.1



All times are GMT -3. The time now is 07:25 PM.