991.2 Carrera T - Picture Thread!
#601
Bought. Now just have to wait for them to be made. They are carbon and then it takes DB "extra" time to make the finish in a double layer piano black.
#602
I think you are going to generate a lot of business for DB Carbon. I agree that it really improvs the look of the otherwise plain door card.
I had DB Carbon make these for me and paint them in piano black to match the standard dash trim. The standard (non-leather) interior door panels are really boring above the nice leather handle (at least on the T). To me this was a fail from Porsche for such an expensive car to have nothing there. The panels are just molded one piece vinyl (or some other similar material) and you can't realistically remove that trim insert and wrap it or replace it, because there is no trim insert.
The DB Carbon fit is perfect as they make them from a mold of a door panel. They're held on with high quality double sided tape. I think they look perfect and they really add that missing bit of detail from the interior. They even wrap the end of the door panel for a completely OEM look.
The DB Carbon fit is perfect as they make them from a mold of a door panel. They're held on with high quality double sided tape. I think they look perfect and they really add that missing bit of detail from the interior. They even wrap the end of the door panel for a completely OEM look.
#603
Arrived in LA from Miami late last night (Friday), one day later than I was told. Too bad I won’t be able to take it for its’ inaugural SoCal drive until Tuesday since I’ll be away for work. Appears to have arrived unscathed though a bit dirty with a little oil that dripped on the hood. Glad I have PPF. Would have been nice if they put some cover to protect the car. Also, another little nit-pick, the drivers should wear gloves to protect the car from their hands. Naturally, they get very dirty with everything they touch loading and unloading .
#604
Rennlist Member
My T lead the pack coming back to Toronto from Hershey PA Porsche parts Swap meet:
The following users liked this post:
SFZ GT3 (09-09-2020)
#605
Rosenbergendo
Some photos of the DB Carbon door sphere trim in Carbon Fiber as installed.
I am totally pleased with how the new CF pieces look on the vinyl door panels.
Dave
Rosenbergendo
As you requested, here are a few pictures of the DB Carbon door spheres in Carbon Fiber that I attached to the vinyl door panel of my new Cayman, as well as a before install photo.
These trim pieces fit perfectly and they match the Factory Carbon Fiber trim that is on the dash. They really make the standard door look significantly more attractive and appealing.
Some photos of the DB Carbon door sphere trim in Carbon Fiber as installed.
I am totally pleased with how the new CF pieces look on the vinyl door panels.
Dave
Rosenbergendo
As you requested, here are a few pictures of the DB Carbon door spheres in Carbon Fiber that I attached to the vinyl door panel of my new Cayman, as well as a before install photo.
These trim pieces fit perfectly and they match the Factory Carbon Fiber trim that is on the dash. They really make the standard door look significantly more attractive and appealing.
Last edited by wdr911; 04-28-2019 at 01:44 PM. Reason: Spelling
The following users liked this post:
SFZ GT3 (09-09-2020)
#606
Today was like a dream come true. My car arrived in LA last Friday night and today I got out for my first “California “ drive. Being from South Florida , the driving and scenery were incredible. I headed North to Ojai, took 33 thru the Los Padres National Forest, to 166 West, then too 101 and 154 thru Los Olivos. Then back on the 101 to Los Virgenes Road, Malibu Canyon Road to the PCH, and back to Playa Del Rey. Nearly 400 miles and a lot of bugs killed! I look forward to my next adventure! I think my Porsche and I have found the roads we’ve always been wanting to drive.
The following users liked this post:
SFZ GT3 (09-09-2020)
#607
Rennlist Member
Originally Posted by wdr911
Rosenbergendo
Some photos of the DB Carbon door sphere trim in Carbon Fiber as installed.
I am totally pleased with how the new CF pieces look on the vinyl door panels.
Dave
Rosenbergendo
As you requested, here are a few pictures of the DB Carbon door spheres in Carbon Fiber that I attached to the vinyl door panel of my new Cayman, as well as a before install photo.
These trim pieces fit perfectly and they match the Factory Carbon Fiber trim that is on the dash. They really make the standard door look significantly more attractive and appealing.
Some photos of the DB Carbon door sphere trim in Carbon Fiber as installed.
I am totally pleased with how the new CF pieces look on the vinyl door panels.
Dave
Rosenbergendo
As you requested, here are a few pictures of the DB Carbon door spheres in Carbon Fiber that I attached to the vinyl door panel of my new Cayman, as well as a before install photo.
These trim pieces fit perfectly and they match the Factory Carbon Fiber trim that is on the dash. They really make the standard door look significantly more attractive and appealing.
#609
Instructor
Today was like a dream come true. My car arrived in LA last Friday night and today I got out for my first “California “ drive. Being from South Florida , the driving and scenery were incredible. I headed North to Ojai, took 33 thru the Los Padres National Forest, to 166 West, then too 101 and 154 thru Los Olivos. Then back on the 101 to Los Virgenes Road, Malibu Canyon Road to the PCH, and back to Playa Del Rey. Nearly 400 miles and a lot of bugs killed! I look forward to my next adventure! I think my Porsche and I have found the roads we’ve always been wanting to drive.
#610
#611
Looks like a great trip. Every weekend or so I do 33 to Lockwood Valley Rd, turn around, then down to Malibu (Piyuma, Encinal, Latigo, etc...) and then back up to SB via PCH. Still lots of roads for you to explore in your T, we certainly are spoiled with easy access to great roads here in CA .
#612
Looks awesome Dave. I had to do the piano black to match the Carrera T interior. So...essentially pay DB for a carbon piece and then pay more to have it painted black!! I won't get mine for approx another month, so waiting patiently.
#613
Rennlist Member
This week I did a few upgrades:
First, I wasn't too happy with the chromed 911T badge I had installed on the engine grille. Since I have no other chrome pieces, it looked out of place.
For that reason, I decided to paint it with a paint kit from ScratchWizard. The color match is perfect for GT Silver.
And since I was going into "paint mode", I decided to also paint the sides of my key to match my car.
I think it now looks like it came like that from the factory.
Checking the color match and the contrast against Agate Gray mirrors:
Trim installed and matching key:
And I also got to install the 70th anniversary plaque I bought from Dave @wdr911 (Thanks Dave!!!).
The plaque is very nicely made, and makes perfect sense in my T, because it is a 2018, and also because of the message...
What do you think?
Cheers!
First, I wasn't too happy with the chromed 911T badge I had installed on the engine grille. Since I have no other chrome pieces, it looked out of place.
For that reason, I decided to paint it with a paint kit from ScratchWizard. The color match is perfect for GT Silver.
And since I was going into "paint mode", I decided to also paint the sides of my key to match my car.
I think it now looks like it came like that from the factory.
Checking the color match and the contrast against Agate Gray mirrors:
Trim installed and matching key:
And I also got to install the 70th anniversary plaque I bought from Dave @wdr911 (Thanks Dave!!!).
The plaque is very nicely made, and makes perfect sense in my T, because it is a 2018, and also because of the message...
What do you think?
Cheers!
The following users liked this post:
SFZ GT3 (09-09-2020)