Adding backseats to a 991.1 GTS
#16
Hi all, I do owe all of you guys an update. Porsche said it could be done, and estimated a price of around 7.500 EUR + VAT for the entire conversion along with parts and them doing the install. I then asked them for a actual offer in mail with the parts listed, and they came back to me after a while and said that they couldn't figure exactly what parts would be needed and bla bla… so in the end they wouldn't make a quote on paper. I got the feeling that they actually might say no if I really bought the car and came in with it. So I took some of the other advice from here and just got myself a 2015 991 Carrera (basic) instead while looking for "the one".
#19
I think it includes removing and welding in part 4 in attached diagram because you are missing the circled item as somebody mentioned above.
Here is a link to the PET for 991 and use it to find same panel for the GT3 and you see it is missing. By pulling back the rear cover you should be able to verify if the circled part is there. Required for the rear seat back latch pin.
https://nemigaparts.com/cat_spares/p...2/547u/801350/
Here is a link to the PET for 991 and use it to find same panel for the GT3 and you see it is missing. By pulling back the rear cover you should be able to verify if the circled part is there. Required for the rear seat back latch pin.
https://nemigaparts.com/cat_spares/p...2/547u/801350/
Last edited by tgavem; 10-19-2018 at 09:39 AM.
#20