New 991 Sport Design race splitter installed!
#17
Rennlist Member
This splitter leave me a bit concerned without a countering rear down force. The rear spoiler in the 991 was designed to provide a balanced downforce at speed. I can't wait to hear how the car brakes at 100+ with this mod installed. Will the rear get squirrelly? When I compare the OEM splitter on the GT3 to this splitter, it appears very aggressive in comparison.
#18
Racer
Thread Starter
This splitter leave me a bit concerned without a countering rear down force. The rear spoiler in the 991 was designed to provide a balanced downforce at speed. I can't wait to hear how the car brakes at 100+ with this mod installed. Will the rear get squirrelly? When I compare the OEM splitter on the GT3 to this splitter, it appears very aggressive in comparison.
Also, this is MUCH less aggressive than the GT3 front lip in the position I have it set. However, I could extend it another 3" if I wanted to. I think the position I have it set at currently is correct for my driving style.
#19
Racer
Thread Starter
#20
The following users liked this post:
PorscheC2S (10-05-2022)
#22
Racer
Thread Starter
I have 4.5" of ground clearance. The good news is that the splitter can be recessed if you want it to be, since its length adjustable.
The following users liked this post:
gex (10-05-2022)
#23
#25
Rennlist Member
Which wind tunnel was this tested in?
Completely pointless.
Completely pointless.
The following 2 users liked this post by gbree:
gex (10-05-2022),
PorscheC2S (10-05-2022)
The following users liked this post:
gex (10-05-2022)