Vorsteiner V-FS Sport Forged Wheels - 991.1 in Stock!
10-02-2017, 08:01 PM
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Vorsteiner V-FS Sport Forged Wheels - 991.1 in Stock!
Vorsteiner V-FS 001 Sport Forged wheels available for you're 991.1 C2/C2S narrow body!
Wheel fitments are as follows
Fitment Front – 20” X 9” ET45
Fitment Rear – 20” X 11” ET55
MSRP - $3,995 (Set of 4)
Vorsteiner Forged Aluminum Bespoke Wheels are made using the latest T-6061 aerospace grade aluminum blocks. These are individually machined to your exacting standards allowing for a lightweight construction and load rated for your specific vehicle. These wheels are built with maximum weight efficiency in order to provide unparalleled performance. The wheels are finished in Brushed Aluminum with a gloss clear coat but we can have them refinished in any finish you desire. Below are the applications we have in stock and ready to ship! Please let us know if you have any questions or would like to place an order, thanks!
Please give us a call, send an email, or shoot us a PM
__________________
TAG MOTORSPORTS
866-793-5490 x1192
web: www.TAGMotorsports.com - email: sales@tagmotorsports.com
Authorized Dealer For: HRE, Vossen, TechArt, AWE, Bilstien, KW, Akrapovic, Capristo, Fabspseed, BBI, Vorsteiner, Milltek, 1016 Industries, BBS, Brembo, GMG, H&R, Pirelli, Michelin, Hankook & more.
TechArt & AWE Tuning's #1 Volume Dealer Nationwide
866-793-5490 x1192
web: www.TAGMotorsports.com - email: sales@tagmotorsports.com
Authorized Dealer For: HRE, Vossen, TechArt, AWE, Bilstien, KW, Akrapovic, Capristo, Fabspseed, BBI, Vorsteiner, Milltek, 1016 Industries, BBS, Brembo, GMG, H&R, Pirelli, Michelin, Hankook & more.
TechArt & AWE Tuning's #1 Volume Dealer Nationwide
10-03-2017, 09:39 AM
#2
Do you have anyone who has run this offset on a 991.2? I would be worried that adding 15mm on my .2 would create major poke. Seems the factory .2 rear wheel is more flush then .1 even though should be the same (half inch wider but 6mm higher offset).
10-05-2017, 12:56 PM
#3
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
10-22-2018, 02:03 PM
#6
Rennlist Member
Easily one of the better looking wheels for the 991 that I've seen. Can it be done without the holes around the center/lug area? And, do you have rears with an ET of 71-76 for 991.2?