When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The idea was to change the color to gloss black, and the following options are under consideration:
1) P O R S C H E
2) turbo S
3) turbo S ("S" being red)
4) 911 turbo S ("S" being red)
The car is 911.1, dark grey metallic.
Any ideas/suggestions?
Any pictures of the same car of the same color with the above options? I made quite a search in the internet, but could not find anything.
I have gone for your option 1, P O R S C H E in black on GT Silver.
I personally think anything more than this on the back looks way too fussy, I was told that Porsche stuck all the badges on the back there for the Chinese and other markets which apparently like maximum bling.
I've gone for the Turbo S in black at the bottom of the doors for vehicle ID
I thought the 991 "turbo" emblem was too small on the bumper without "PORSCHE" so I looked at the 997 versions. I discovered there are two 997 sizes. The turbo S set is a bit larger than the 991 but is smaller than the 997 turbo alone version.
I went for matt black PORSCHE on Rhodium Silver Turbo S Cabriolet.
Everything was too busy. Watch out though, if you factory order PORSCHE, only it will be lowered and centered.
I debated too. Thought just Porsche or have the S in yellow, looked the best in my opinion.
Ended up "converting" to matte black, and now that I look at it, the "turbo" is a bit small. Need to change it
Nice!
Not sure, but shouldn't P O R S C H E be more centred in the available space?
It looks like it may be sitting a bit to high.
You are correct.
If it is PORSCHE only, then it is positioned a bit lower, more to the center. It is 6.5 centimeters (2.56 inches from the upper side of the bumper to the upper side of the letters)