991 turbo to GT3 front/rear conversion?
The following users liked this post:
Kinetic1 (11-01-2019)
#17
Instructor
Originally Posted by whoadude
There's other ways to get an aggressive look if you are creative
#18
#19
Instructor
Originally Posted by whoadude
Thanks! Moshammer lip and fenders, oem RS side skirts, oem .1 RS carbon hood, and HR springs. Probably will swap out the HR spring set up soon though.
#20
Very nice. Are you in the states? Moshammer was high on my list of mods but I was unable to find a reliable importer. Think your setup would work great on a cabriolet though the rear wing setup has always perplexed me on a cab--a wing larger than oem has never looked right to me on a cab.
The following users liked this post:
Agentorange (11-25-2019)
#24
nice!
#25
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#26
Racer
Btw found a decklid support / latch used did you get yours already? If not let me know I’ll send you the link.
#27
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
About the latch, please do if you found one, thank you
#28
Latch
#29
Racer
Yes, I have the carbon fiber latch plate and the center cutout is not going to be an issue. Beau at *Wicked is providing a custom lid for the turbo vents and we are planning to precision cut the center hole to match.
#30
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
GT2Driver, sorry I already purchased the carbon latch. If anything changes however I will let you know for sure.