Spotting a GT3 on HREs
#17
Former Vendor
Thread Starter
by going to 21" I know the tire side walls get smaller to compensate for the larger wheel, however do you know if you were able to hit the exact overall diameter dimensions of the original 20" setup? just going 1 inch larger on the wheel and 5 increments smaller on the proportionate sidewall doesn't necessarily mean youll have the same original diameter.
just curious how close you got. this car is very sensitive to this.
just curious how close you got. this car is very sensitive to this.
We weren't able to hit identical overall diameter dimensions however we believe we came close: 0.31". For this specific model, we were aiming at less than 0.5".
Agreed. It's big for us too, we'd normally recommend OEM or 19".
#19
Former Vendor
If anyone is in the Los Angeles area we have an HRE P104 on display with the brushed gold finish. It is amazing. Not for everyone, but if you like gold wheels it is AWESOME!
#20
Former Vendor
Thread Starter
#21
Burning Brakes
#23
Former Vendor
Thread Starter
Thanks! We'll keep our eyes open.
We have:
https://rennlist.com/forums/991-gt3/...-hre-p101.html
https://rennlist.com/forums/991-gt3/...-p106cl-2.html
https://rennlist.com/forums/991-gt3/...-hre-p101.html
https://rennlist.com/forums/991-gt3/...-p106cl-2.html
#25
Nordschleife Master
So 21" have no clearance issues with wheel wells, ect ? No ride height changes needed...in other words 21's fit the stock car ? I like the design of the wheel.
#26
Former Vendor
Thread Starter
However, to conform to the original purpose and nature of the 991 GT3, we recommend 20".
#27
Nordschleife Master
We did not anticipate any modifications being required to make this set fit (to our knowledge after conversing with the owner, there were no modifications performed to the body, including ride height adjustments).
However, to conform to the original purpose and nature of the 991 GT3, we recommend 20".