Expel clear bra
#1
Drifting
Thread Starter
Expel clear bra
I searched clear bra and see 10K threads on clear bra. Getting a quote today. Please let me know if I missed any area.
Is there diff version of Expel?
-Entire front hood
-Side mirrors
-Door entry
-Door handle pockets
-Gas tank lid
-What about entire rear bumper specially on a white car?
Is there diff version of Expel?
-Entire front hood
-Side mirrors
-Door entry
-Door handle pockets
-Gas tank lid
-What about entire rear bumper specially on a white car?
#2
Race Director
Xpel ultimate is what you want and that I pretty much what all the good installers are using if it is Xpel.
Door handle pocket, Gas tank lid, rear bumper - do not bother.
Headlights, Front blinker lights that are in the grill - yes
I think you could make the argument the first 8 inches of the roof beginning from the wind shield side. I am not going to do it but it sort of makes sense because I once chipped my 997.2 turbo up there
Door handle pocket, Gas tank lid, rear bumper - do not bother.
Headlights, Front blinker lights that are in the grill - yes
I think you could make the argument the first 8 inches of the roof beginning from the wind shield side. I am not going to do it but it sort of makes sense because I once chipped my 997.2 turbo up there
#3
Rennlist Member
Just replaced my clear bra after 2 years and 20k miles of track and mountain driving. The following areas had the most impacts, chips (into the bra):
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
#4
Rennlist Member
Xpel ultimate is what you want and that I pretty much what all the good installers are using if it is Xpel.
Door handle pocket, Gas tank lid, rear bumper - do not bother.
Headlights, Front blinker lights that are in the grill - yes
I think you could make the argument the first 8 inches of the roof beginning from the wind shield side. I am not going to do it but it sort of makes sense because I once chipped my 997.2 turbo up there
Door handle pocket, Gas tank lid, rear bumper - do not bother.
Headlights, Front blinker lights that are in the grill - yes
I think you could make the argument the first 8 inches of the roof beginning from the wind shield side. I am not going to do it but it sort of makes sense because I once chipped my 997.2 turbo up there
#5
Drifting
Thread Starter
Thanks guys. My wife jewelry marks were all over my last car door handle pocket. Car still sitting at SD port waiting on stupid stickers.
Trending Topics
#9
Rennlist Member
Just replaced my clear bra after 2 years and 20k miles of track and mountain driving. The following areas had the most impacts, chips (into the bra):
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
Forgive my ignorance, but I'm not used to verbally describing some of these parts of the cars.
What is the rocker sill? Is it the part just below the door?
When you say inner wheel arches, do you mean just the arch in front of the rear wheel, or do you mean the lining of both wheel arches?
Did you put expel on your entire roof? If so did you include the A piilars?
#10
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
@ jimmy-D, yes Chris F has the entire hood covered as well
hood
front bumper
front fenders
wheel arches
mirrors
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
i did rear bumpr, wont do it again. you dont really get many hits there
hood
front bumper
front fenders
wheel arches
mirrors
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
i did rear bumpr, wont do it again. you dont really get many hits there
#11
Just replaced my clear bra after 2 years and 20k miles of track and mountain driving. The following areas had the most impacts, chips (into the bra):
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
entire nose
rearview mirror backs
lower rocker sills all the way to rear fender as high wheel top
inner wheel arches
roof (redid entire top on this part).
Doors, rear quarter of car had only one or two super minor chips on the wing top. When the old bra came off, the paint was near flawless. This layout worked for me.
#12
I got xpel ultimate on my bumper, door edges, door cups, and at the very last moment also the hood. Wish I hadn't done the hood. The film isn't quite perfect. You can see faint marks under certain angles in a few places. These might be what people call stretch marks. Or maybe they are slight scuffs in the material that was there from the beginning.
#14
Rennlist Member
Your post was particularly helpful.
Forgive my ignorance, but I'm not used to verbally describing some of these parts of the cars.
What is the rocker sill? Is it the part just below the door?
When you say inner wheel arches, do you mean just the arch in front of the rear wheel, or do you mean the lining of both wheel arches?
Did you put expel on your entire roof? If so did you include the A piilars?
Forgive my ignorance, but I'm not used to verbally describing some of these parts of the cars.
What is the rocker sill? Is it the part just below the door?
When you say inner wheel arches, do you mean just the arch in front of the rear wheel, or do you mean the lining of both wheel arches?
Did you put expel on your entire roof? If so did you include the A piilars?
Rocker sill is the strip from wheel to wheel below the door.
Inner arch is the painted underside of the wheel well. At speed, the wheels throw stones and they can easily get chipped.
As far as windshield, I replaced mine at about 20k miles mainly from bad sandblasting on mountain drives. I was concerned with distortion using clear pled. I think the cost over a couple of years will end up being the same and would prefer a new windshield.
As far as roof, I did entire a pillar and top section and the termination is at the edge of the rear window. Not optimal but it flows.
For the hood, if there are distortions, it should be redone. Done correctly, it looks like paint.
#15
Rennlist Member
I know it depends on how much is done but on average what is the cost? For an example how much should one expect top pay for the hood, bumper handles and rear arches?