Notices
991 GT3, GT3RS, GT2RS and 911R 2012-2019
Sponsored by:
Sponsored by:

GT2RS stripe measurements

Thread Tools
 
Search this Thread
 
Old 06-03-2022 | 04:27 PM
  #1  
nothingman's Avatar
nothingman
Thread Starter
Rennlist Member
 
Joined: Nov 2020
Posts: 231
Likes: 240
From: MD/PA border
Default GT2RS stripe measurements

I'm hopeful someone with a GT2RS will be willing to help me out by taking measurements of the center stripe of the painted section on the hood and roof. I have a GT4 in Gentian Blue, and had a local vinyl shop re-create the basic look of the stripes on the hood and roof on my car in silver, however using the pictures I provided they got the measurements all wrong. I'm about to have them taken off and redone.

Can someone please take measurements and let me know the distance between the stripes on both the hood and roof? Also, does the front portion connecting the stripes on the hood have a curve in it? Close-up photos appreciated if possible.



Here's my GT4 with the poorly done stripes:



Last edited by nothingman; 06-03-2022 at 04:40 PM.
Old 06-03-2022 | 04:53 PM
  #2  
rob944s2's Avatar
rob944s2
Rennlist Member
 
Joined: Nov 2003
Posts: 479
Likes: 392
From: Las Vegas
Default

Yeah... the boxiness of that exposed area of the hood doesn't look good at all unfortunately. If you wanted to try to save it I would trim away the film below the logo (see my quick edit)



Old 06-03-2022 | 06:23 PM
  #3  
nothingman's Avatar
nothingman
Thread Starter
Rennlist Member
 
Joined: Nov 2020
Posts: 231
Likes: 240
From: MD/PA border
Default

Originally Posted by rob944s2
Yeah... the boxiness of that exposed area of the hood doesn't look good at all unfortunately. If you wanted to try to save it I would trim away the film below the logo (see my quick edit)
Thanks for your effort. I’m set on having it redone correctly, so I’m going to hold hope someone here can give me measurements.


Old 06-04-2022 | 03:38 AM
  #4  
Jean's Avatar
Jean
Addict
Lifetime Rennlist
Member

 
Joined: Apr 2002
Posts: 5,452
Likes: 179
Default

Not accurate to a mm, but almost.
Old 06-04-2022 | 06:46 AM
  #5  
nothingman's Avatar
nothingman
Thread Starter
Rennlist Member
 
Joined: Nov 2020
Posts: 231
Likes: 240
From: MD/PA border
Default

Originally Posted by Jean
Not accurate to a mm, but almost.
This is exactly what I was looking for. Thank-you so much!

I’ll post an update here once I have the stripes redone in case anyone is curious to see how they look.



Quick Reply: GT2RS stripe measurements



All times are GMT -3. The time now is 05:53 AM.