JesseRohr

I have a bunch of plans for the car and instead of creating a bunch of new threads I wanted to keep a consolidated list of the updates in one thread.

So far to date:

GR Door Pulls:
Attachment 1341470
Attachment 1341471

Swapped the giant GT3RS door logos for smaller ones in GR:


Porsche logo on wing in GR:


Full front XPel Ultimate:


Xpel Stealth Stone Guards:


Rear GT3 RS logo in GR:


Tossed a piece of white vinyl under the RS logo in back window to make logo pop (plan to swap to GR vinyl)




Parts to come:
2PC Steel rotors (still undecided)
GR Supreme Power Harness Bar
Track Wheel setup (still undecided)
Winter Wheel Setup (this car is my DD)

mike.baa

Man, love that paint. Looking great so far!

RoyalPink

Keep up the good work Jesse. Your pics/car look amazing. What are you using for the photos if you don't mind me asking?

NSD991

Echo really nice photography

JesseRohr

Thank you kindly. The camera used is my walk around camera rig for these. Nikon D850 body and Tamron f2.8 24-70 glass.

I also run a Nikon D5X and a bunch of other prime glass depending on the situation.

JesseRohr

Update on some incoming mods:

2pc discs ordered - Giro Disc
Guards Red sports chrono clock
MBRP center muffler bypass
997 center caps for CL. Black with Red "RS"

zmon

great looking car, love how these look with the painted hood.

Sleepy996

Jesse I forgot to mention I think the tips from the 991.1 RS exhaust might be too short for the .2 model if I recall from when I did exhaust on my .2 lizard. Hopefully I'm wrong but I have a feeling you'll figure it out regardless.

RoyalPink

Jesse what do you think about painting your shifter insert GR? What gave me the idea was the Lizard Green shifter plate stripes but that was only available for the LG launch car. Here's mine and the thread in case you're interested.

https://rennlist.com/forums/991-gt3-...nterested.html

JesseRohr

Great idea. I was actually going to replace the CF trim ring around the center console with a GR one from Suncoast.

CustomPerformanc

I like what you have done thus far. Pops of matching red here and there are definitely some nice touches to tie it all together. Very classy and tasteful. Not so sure on the GR center console ring to replace the factory CF ring. Sometimes less is more...

Great pics by the way!

RoyalPink

I've since done that as well. Here is a pic so you can see both together. What I really like is the ability to swap them out. I'll run with the colored piece for a couple months then switch to the carbon and vice versa. Gives it a different look from time to time. It takes less then two minutes to pop the trim out and swap it also.

JesseRohr

GR center console trim showed up as well as the red script (997) CL center caps.

Forgive the iPhone photos:

JesseRohr

Giro Disc showed up. Straight forward install. Took about an hour in my driveway alone with hand tools.

Stock steel

Caliper removed.

Rotor off.

Comparison.

New rotor on.











I also use a rubber glove to keep the mess to a minimum while working with the wheels off.


Rear parking brake assembly.

JesseRohr

Some better pics of some recent updates.

- Giro Disc 380mm front and rear rotors
- Xpel XR Plus Ceramic window Tint (50%)
- Guards Red center console trim
- Guards Red film applied to RS logo in rear window




Giro Disc poking through.



Window film accurately portrayed.

Rear Red RS logo

Film contrast.

GR trim