When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Those stickers look legit, like they are factory, they most likely are. Because they don't wrap around the body panel which is what the after market likes to do for some reason. Well done. That small gap between where the sticker stops and the body panel ends is key to the look that Porsche intended.
Those stickers look legit, like they are factory, they most likely are. Because they don't wrap around the body panel which is what the after market likes to do for some reason. Well done. That small gap between where the sticker stops and the body panel ends is key to the look that Porsche intended.
To be clear;
CXX factory stripes do wrap into front and rear door jams. Also the edges are cut sharp.
Only the very front and rear portions do not wrap into the wheel wells. Also another detail to observe, the edges are rounded slightly which is tough, but not impossible for AM to copy.
To be clear;
CXX factory stripes do wrap into front and rear door jams. Also the edges are cut sharp.
Only the very front and rear portions do not wrap into the wheel wells. Also another detail to observe, the edges are rounded slightly which is tough, but not impossible for AM to copy.
Very interesting. Every 911R and the poster above clearly have a gap between where the sticker ends and the body panel's edge. I guess Porsche is not consistent in their install sticker method 911R Sticker Detail.
Very interesting. Every 911R and the poster above clearly have a gap between where the sticker ends and the body panel's edge. I guess Porsche is not consistent in their install sticker method 911R Sticker Detail.
Maybe a factory change up between the 991R and GT3T stripe decals?
Yes i thought they looked like satin - very nice. I went with the standard silver and regret not specifying the satin silver as i think they make a subtle difference and matches better with the aluminium/polished window trimmings. The difference was noticeable when compared live with another GT3 with those satin silver wheels, next to mine. Am considering getting my dealer to spray them satin silver...
Chalk wasn't my first choice but I'm really liking the color. In dusk chalk has blue tinges (ala graphite blue metallic) and appears white-ish in bright daylight. My wife advocated for yellow features, so we went deep with yellow stitching and belts, in addition to chalk interior trim. This config is a departure from most I've seen!
No, Because GT3's are coming in with factory stickers that are just like the 911R. GT3 Sticker Detail same as 911R
I think most factory GT3 side stripes are installed like 1Gunner has graciously pointed out including painstakingly sharing measurements in prior posts. Thanks 1Gunner. See below for pictures where the side stripes stop short of the front and rear wheel well/fender but DO appear to wrap the edges of the door cut outs. Notice these pictures are of cars that haven't been prepped fully so they are presumably CXX factory install and not aftermarket. The white car you posted very well could be aftermarket install since the factory would likely not put green 911R stripes on a touring.