Check this out before wrapping or speccing your next Porsche!
#16
Former Vendor
Thread Starter
We are overwhelmed by the positive response on Rennlist so far, and cannot thank you guys all enough! We are currently assisting in 5 very special Porsche CXX orders for the new GT2 RS, and several more for the 991.2 GT3.
We love working with you guys! We are impressed with an incredible amount of design taste many of you have, and bouncing back and forth ideas has been a blast.
Here are several older renderings we did of the GT2 RS some of you may have seen on Facebook. If anybody needs any help speccing their GT2 RS or any other Porsche, feel free to shoot us a message!
We had the pleasure of checking out the GT2 RS at Quail Lodge at Car Week last weekend at a private Porsche event. The car is absolutely incredible in person! If you have one on order and have not yet seen the car in person, you will NOT be disappointed. :-)
We love working with you guys! We are impressed with an incredible amount of design taste many of you have, and bouncing back and forth ideas has been a blast.
Here are several older renderings we did of the GT2 RS some of you may have seen on Facebook. If anybody needs any help speccing their GT2 RS or any other Porsche, feel free to shoot us a message!
We had the pleasure of checking out the GT2 RS at Quail Lodge at Car Week last weekend at a private Porsche event. The car is absolutely incredible in person! If you have one on order and have not yet seen the car in person, you will NOT be disappointed. :-)
#18
Former Vendor
Thread Starter
For now, we will leave this as a teaser for the next 8 GT2 RS & 991.2 GT3 projects we have in the works. All from Rennlist, all different colors of the rainbow, including black and white. Crazy to see our project board for 8 designs, and NONE of them having anything in common. Going to be some crazy specs and designs in the coming months!
#19
Former Vendor
Thread Starter
Quick rendering of a 991 2RS with a simplistic Cup Car inspired spec/design.
Enjoy! If anybody needs any help with a wrap or spec let me know.
Enjoy! If anybody needs any help with a wrap or spec let me know.
#20
Question: it seems you design wheel wraps too. How does a vinyl wrapped wheel withstand heat, brake dust, debris, etc? With heat being my most important question. Thanks.
#21
Former Vendor
Thread Starter
It does, however, make sense to do small bits and pieces. For example, pinstripes can be done in vinyl, as well as any part the faces. Small sticker logos on BBS's and Volk TE37's hold up very well with regular cleaning, even with track usage.
#22
Originally Posted by SamFromTX
Question: it seems you design wheel wraps too. How does a vinyl wrapped wheel withstand heat, brake dust, debris, etc? With heat being my most important question. Thanks.
Did it on my calipers and rims in May 2017
#23
Rennlist Member
I have one more thing to add about Nick & Anthony.
My brother-in-law was looking at buying a 2016 GT3 from a dealer up north last week, and he and I both live down here in Florida. My BIL asked if I knew anyone up there that could put eyes on the car.
Sure enough, I knew it was in the same state as Nick/Anthony. So I texted them to see if they lived anywhere close to the dealership.
They immediately texted me back and said not only do they live 10 miles from the dealership, they were actually driving right by it and would be happy to stop by and look at the car.
They then sent a TON of pics and even called by BIL with their report on the car's condition.
I can't say enough about what I have seen with these two - working with them to get the design I wanted on my 991.2 GT3 was a pleasure. It's clear that these guys will be very successful in what they do.
Nick & Anthony - I can't thank you guys enough!!! The deal is done and that awesome looking Sapphire Blue GT3 is on the way to Florida!
My brother-in-law was looking at buying a 2016 GT3 from a dealer up north last week, and he and I both live down here in Florida. My BIL asked if I knew anyone up there that could put eyes on the car.
Sure enough, I knew it was in the same state as Nick/Anthony. So I texted them to see if they lived anywhere close to the dealership.
They immediately texted me back and said not only do they live 10 miles from the dealership, they were actually driving right by it and would be happy to stop by and look at the car.
They then sent a TON of pics and even called by BIL with their report on the car's condition.
I can't say enough about what I have seen with these two - working with them to get the design I wanted on my 991.2 GT3 was a pleasure. It's clear that these guys will be very successful in what they do.
Nick & Anthony - I can't thank you guys enough!!! The deal is done and that awesome looking Sapphire Blue GT3 is on the way to Florida!
#24
Rennlist Member
Here is one of our projects we have been working on today. Just a simple color change rendering. This client is considering wrapping their Cayman in Laguna Seca Blue, and changing the blue accents to gold. Also, we rendered carbon fiber mirrors from the GT4, which the client has recently purchased.
Here is the before and after:
Here is the before and after:
Just to give folks an idea - what would be the cost for a wrap like this, and a reasonable cost of install (Bay Area, CA)?
Thanks
#25
Former Vendor
Thread Starter
I have one more thing to add about Nick & Anthony.
My brother-in-law was looking at buying a 2016 GT3 from a dealer up north last week, and he and I both live down here in Florida. My BIL asked if I knew anyone up there that could put eyes on the car.
Sure enough, I knew it was in the same state as Nick/Anthony. So I texted them to see if they lived anywhere close to the dealership.
They immediately texted me back and said not only do they live 10 miles from the dealership, they were actually driving right by it and would be happy to stop by and look at the car.
They then sent a TON of pics and even called by BIL with their report on the car's condition.
I can't say enough about what I have seen with these two - working with them to get the design I wanted on my 991.2 GT3 was a pleasure. It's clear that these guys will be very successful in what they do.
Nick & Anthony - I can't thank you guys enough!!! The deal is done and that awesome looking Sapphire Blue GT3 is on the way to Florida!
My brother-in-law was looking at buying a 2016 GT3 from a dealer up north last week, and he and I both live down here in Florida. My BIL asked if I knew anyone up there that could put eyes on the car.
Sure enough, I knew it was in the same state as Nick/Anthony. So I texted them to see if they lived anywhere close to the dealership.
They immediately texted me back and said not only do they live 10 miles from the dealership, they were actually driving right by it and would be happy to stop by and look at the car.
They then sent a TON of pics and even called by BIL with their report on the car's condition.
I can't say enough about what I have seen with these two - working with them to get the design I wanted on my 991.2 GT3 was a pleasure. It's clear that these guys will be very successful in what they do.
Nick & Anthony - I can't thank you guys enough!!! The deal is done and that awesome looking Sapphire Blue GT3 is on the way to Florida!
It was our pleasure man!
We really appreciate the kind words. Anything we can do to help out a fellow Porsche enthusiast is our duty! We have never been apart of a more welcoming community.
#26
Former Vendor
Thread Starter
Once you add in design elements, or use any sort of chrome color, prices can go anywhere from $5,000-$10k+.
#27
Former Vendor
Thread Starter
Just wanted to share with you guys a special project we recently completed.
We were contacted by the guys at RDS Auto Group (for those who know they own a variety of luxury car dealerships in the Philadelphia are) to design a bespoke P1. The design was to take inspiration from a prototype test vehicle, while incorporating a variety of personal touches.
The first step in the process was a batch of photo-realistic renderings. These include final artwork files modified in a way to fit the vehicle in a realistic perspective, to show the client what the final design will look like in the real world. This way, any final tweaks that need to be made can be done so in the virtual world. In the case of this project, the renderings allowed us to decide that the carbon on the front and rear clips should remain exposed.
Here are the renderings we created for the project:
With the final design locked in, the waiting game started while the guys over at McLaren Philadelphia brought her to life!
The final result, photographed by Jon Wheel of RDS Auto Group, is a site to behold!
If any of you are local to the Radnor Hunt Concours just outside of Philadelphia, PA, this car will be there on Sunday, and so will we!
We were contacted by the guys at RDS Auto Group (for those who know they own a variety of luxury car dealerships in the Philadelphia are) to design a bespoke P1. The design was to take inspiration from a prototype test vehicle, while incorporating a variety of personal touches.
The first step in the process was a batch of photo-realistic renderings. These include final artwork files modified in a way to fit the vehicle in a realistic perspective, to show the client what the final design will look like in the real world. This way, any final tweaks that need to be made can be done so in the virtual world. In the case of this project, the renderings allowed us to decide that the carbon on the front and rear clips should remain exposed.
Here are the renderings we created for the project:
With the final design locked in, the waiting game started while the guys over at McLaren Philadelphia brought her to life!
The final result, photographed by Jon Wheel of RDS Auto Group, is a site to behold!
If any of you are local to the Radnor Hunt Concours just outside of Philadelphia, PA, this car will be there on Sunday, and so will we!
#28
Rennlist Member
^^^
That's sick, Man! Although not sure I could do it. Looking forward to what you guys come up with for my .2. Will be with Smokies group next weekend and would love to share designs and get feedback. You guys have got a following there. Will be with riedry while there. Did a nice job on his RS is the RSR livery.
That's sick, Man! Although not sure I could do it. Looking forward to what you guys come up with for my .2. Will be with Smokies group next weekend and would love to share designs and get feedback. You guys have got a following there. Will be with riedry while there. Did a nice job on his RS is the RSR livery.
#29
Race Director
Wow. That is awesome! The Perma-mule.