JCR // Titanium Valved Race Pipe (New Product & Intro Offer!)
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
JCR // Titanium Valved Race Pipe (New Product & Intro Offer!)
Hey all,
Back again with another new and exciting addition to the JCR Porsche product line. This product release marks the end (never say never) of our exhaust development for the 991 GT3 platform, with our new GT2 RS products set for release next!
This time it's our new Titanium Valved Race Pipe suitable for all 991 GT3 based models.
I have attached our release information along with an introductory pricing offer.
As ever, please feel free to ask any questions relating to the products and if you wish to order please just go ahead and do so following the links and instructions included at the bottom of this post.
JC
- - - - - - - - - - - - - - - - - - -
Introduction
There has been a calling since we first debuted our Titanium Race Pipe to offer a version which is a little less extreme in volume whilst retaining that signature Race Pipe tone and quality of sound.
We’re very pleased to officially launch the JCR Titanium Valved Race pipe which we feel offers owners the best of both worlds. Incredible sound with the valves open and quiet operation with valves closed, all controlled from the OEM cabin mounted exhaust switch.
Valved Exhaust
The JCR Titanium Valved Race Pipe offers the best of both worlds. Raw uninterrupted Race Pipe sound with the valves open and quiet operation with valves closed. The perfect solution for those who love the Race Pipe sound but want to retain the factory Porsche exhaust button functionality inside the cabin. The valved & silenced design enables owners to quieten down the exhaust at the flick of a switch, dramatically reducing sound levels inside and outside the vehicle.
The Design
Through extensive testing and development we have perfected a number of key areas in the exhaust systems design to perfectly tune and accentuate the tone and pitch of the JCR Titanium Silenced Race Pipe's sound and performance. The system features 70mm pipe work, routed cleverly to achieve the desired overall length whilst offering an target back pressure level to maintain low down torque yet allow the engine to breathe right up to the 9000rpm redline, in certain applications.
The system then merges into another key point, collecting the gasses and creating a scavenging effect whilst targeting unwanted drone frequencies then heading back out into a twin 70mm to the factory style 3-bolt flange allowing customers to retain OEM tips or upgrade for any aftermarket tips which utilise the OEM style 3-bolt flange.
We have manufactured a light weight fixing, utilising the OEM side silencer brackets we support the Titanium Race pipe from both sides to ensure no additional load is applied to the header flange. This also enables us to mount the exhaust with a small rubber mount, isolating any unwanted vibrations from the cabin.
Performance Increase
Every component of the JCR Titanium Exhaust line is guaranteed to improve HP & TQ with to a varying degree dependant on the specific combination of parts. In combination with the OEM headers the JCR Titanium Silenced Race Pipe in testing saw peak gains of 10-15bhp and 10-12ftlbs or torque with little to no low down torque loss over the OEM header back system, performance is on par with the regular (non silenced) Race Pipe with only a small weight penalty due to the addition of valves and silencers into the system.
RSR Sound
For anyone who has heard the 2018 GTE 911 RSR in person they would be hard pushed to say that there is a better sounding race car. We feel we have managed to achieve that same glorious tone with the JCR Titanium Valved Race Pipe, hearing truly is believing in this case. With valves open the Titanium Valved Race Pipe sounds exactly as per our very popular non-silenced Race Pipe. Truly the best of both worlds in this case.
Key Features
ORDER NOW - TITANIUM VALVED RACE PIPE
£4495.00 GBP ($5865.00 USD) + shipping // INTRO DISCOUNT - £4145.00 GBP ($5400.00 USD) + free shipping
Back again with another new and exciting addition to the JCR Porsche product line. This product release marks the end (never say never) of our exhaust development for the 991 GT3 platform, with our new GT2 RS products set for release next!
This time it's our new Titanium Valved Race Pipe suitable for all 991 GT3 based models.
I have attached our release information along with an introductory pricing offer.
As ever, please feel free to ask any questions relating to the products and if you wish to order please just go ahead and do so following the links and instructions included at the bottom of this post.
JC
- - - - - - - - - - - - - - - - - - -
Introduction
There has been a calling since we first debuted our Titanium Race Pipe to offer a version which is a little less extreme in volume whilst retaining that signature Race Pipe tone and quality of sound.
We’re very pleased to officially launch the JCR Titanium Valved Race pipe which we feel offers owners the best of both worlds. Incredible sound with the valves open and quiet operation with valves closed, all controlled from the OEM cabin mounted exhaust switch.
Valved Exhaust
The JCR Titanium Valved Race Pipe offers the best of both worlds. Raw uninterrupted Race Pipe sound with the valves open and quiet operation with valves closed. The perfect solution for those who love the Race Pipe sound but want to retain the factory Porsche exhaust button functionality inside the cabin. The valved & silenced design enables owners to quieten down the exhaust at the flick of a switch, dramatically reducing sound levels inside and outside the vehicle.
The Design
Through extensive testing and development we have perfected a number of key areas in the exhaust systems design to perfectly tune and accentuate the tone and pitch of the JCR Titanium Silenced Race Pipe's sound and performance. The system features 70mm pipe work, routed cleverly to achieve the desired overall length whilst offering an target back pressure level to maintain low down torque yet allow the engine to breathe right up to the 9000rpm redline, in certain applications.
The system then merges into another key point, collecting the gasses and creating a scavenging effect whilst targeting unwanted drone frequencies then heading back out into a twin 70mm to the factory style 3-bolt flange allowing customers to retain OEM tips or upgrade for any aftermarket tips which utilise the OEM style 3-bolt flange.
We have manufactured a light weight fixing, utilising the OEM side silencer brackets we support the Titanium Race pipe from both sides to ensure no additional load is applied to the header flange. This also enables us to mount the exhaust with a small rubber mount, isolating any unwanted vibrations from the cabin.
Performance Increase
Every component of the JCR Titanium Exhaust line is guaranteed to improve HP & TQ with to a varying degree dependant on the specific combination of parts. In combination with the OEM headers the JCR Titanium Silenced Race Pipe in testing saw peak gains of 10-15bhp and 10-12ftlbs or torque with little to no low down torque loss over the OEM header back system, performance is on par with the regular (non silenced) Race Pipe with only a small weight penalty due to the addition of valves and silencers into the system.
RSR Sound
For anyone who has heard the 2018 GTE 911 RSR in person they would be hard pushed to say that there is a better sounding race car. We feel we have managed to achieve that same glorious tone with the JCR Titanium Valved Race Pipe, hearing truly is believing in this case. With valves open the Titanium Valved Race Pipe sounds exactly as per our very popular non-silenced Race Pipe. Truly the best of both worlds in this case.
Key Features
- 100% Titanium Construction
- Titanium Valves
- Titanium Silencers
- HP & TQ Increase
- OEM Style 3-Bolt Exhaust Tip Flange
- 991.1 GT3 / R / RS
- 991.2 GT3 / Touring / RS
- £4495.00
- Available Now
ORDER NOW - TITANIUM VALVED RACE PIPE
£4495.00 GBP ($5865.00 USD) + shipping // INTRO DISCOUNT - £4145.00 GBP ($5400.00 USD) + free shipping
__________________
WE'RE NO LONGER ACTIVE ON THE RENNLIST FORUMS - FOR ALL ENQUIRIES PLEASE CONTACT US VIA THE JCR WEBSITE BELOW
/ / / JCR PORSCHE \ \ \
contact@jcr-developments.com
Facebook | Instagram | Youtube
/ / / JCR PORSCHE \ \ \
contact@jcr-developments.com
Facebook | Instagram | Youtube
Last edited by JCR-Porsche; 04-17-2019 at 05:53 AM.
#3
awesome! I hope this means pre-orders will be shipping in the not too distant future. absolutely psyched for mine!
cats are still intact - ergo, no engine codes will arise as a result of this
cats are still intact - ergo, no engine codes will arise as a result of this
#5
Rennlist Member
@JC
1) Do you have any sound measurements between this new system at the multiple RPM ranges vs. the Silenced non-valved Race Pipes? The silencers look very similar between both systems, so I wonder if the valves closed are producing similar sound levels to my JCR Silenced Race Pipes (I don't want my system any louder to what it is).
2) Also with the valves open, is the sound level identical to the Non-Silenced/Non-Valved Race Pipes (the original race pipes)?
Thanks
1) Do you have any sound measurements between this new system at the multiple RPM ranges vs. the Silenced non-valved Race Pipes? The silencers look very similar between both systems, so I wonder if the valves closed are producing similar sound levels to my JCR Silenced Race Pipes (I don't want my system any louder to what it is).
2) Also with the valves open, is the sound level identical to the Non-Silenced/Non-Valved Race Pipes (the original race pipes)?
Thanks
#7
@JC
1) Do you have any sound measurements between this new system at the multiple RPM ranges vs. the Silenced non-valved Race Pipes? The silencers look very similar between both systems, so I wonder if the valves closed are producing similar sound levels to my JCR Silenced Race Pipes (I don't want my system any louder to what it is).
2) Also with the valves open, is the sound level identical to the Non-Silenced/Non-Valved Race Pipes (the original race pipes)?
Thanks
1) Do you have any sound measurements between this new system at the multiple RPM ranges vs. the Silenced non-valved Race Pipes? The silencers look very similar between both systems, so I wonder if the valves closed are producing similar sound levels to my JCR Silenced Race Pipes (I don't want my system any louder to what it is).
2) Also with the valves open, is the sound level identical to the Non-Silenced/Non-Valved Race Pipes (the original race pipes)?
Thanks
Trending Topics
#8
Instructor
JC,
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
#9
Rennlist Member
Gulp.....MUST HAVE.
Glad I haven't installed my other JCR exhaust as I might NEED to exchange
Glad I haven't installed my other JCR exhaust as I might NEED to exchange
#10
JC,
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
#11
JC,
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
Shouldn't valves closed sound as loud and just like your silenced race pipe? It sounds quieter than stock in the video.
Can you please add this one to the comparison list you made from before so we can get an idea of the volume please .. Example of your comparison attached..
Thank you!
#12
Rennlist Member
Join Date: Feb 2006
Location: Wishing I Was At The Track
Posts: 13,668
Received 1,900 Likes
on
978 Posts
Couple of questions:
- does this system retain stock cats?
- where are the valves? don't see them in photos.
- any photos of full system? would like to see the rest of the plumbing.
- how would this system differ from using valved side muffler delete and silenced center section?
Thanks
- does this system retain stock cats?
- where are the valves? don't see them in photos.
- any photos of full system? would like to see the rest of the plumbing.
- how would this system differ from using valved side muffler delete and silenced center section?
Thanks
Last edited by Nizer; 02-21-2019 at 08:52 PM.
#14
Any drone or CEL? Thanks very interested!
#15
Three Wheelin'
Curious how this compares with your center silenced bypass + valved side bypass?