When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I put it up for the winter because I want to get a head start on redoing the look. The paint I bought for the grey to paint the bumpers when I did the mods last winter didn't match for squat. So after a summer of driving it and face palming every time I walk up to it in a parking lot.. I decided to strip it down and give it a full paint job.
I've already took of the hatch, rr bumper and some smaller stuff. I already have the paint and did the body mods last winter so this winter its just a paint job which gives me months to make it perfect. Gonna take me time this winter and hopefully make it look like this.. or close to it.
anyone know how to take these strips off? I did it when I painted my 911 but i don’t remember 🤦♂️
Remove the pop rivet at the rear portion of this strip.
Use a plastic body tool to lift the front part of the strip that is under the windshield rubber seal.
Not sure if this next step is necessary (been awhile): Unclip the strip and/or carefully slide the spreader (center portion) of the clips to remove them and the strip
HTH
Last edited by ochristofferson; 10-13-2022 at 08:28 PM.
Reason: modified