When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Spyder update:
All "restoration" work is complete; Spyder is back home with new PPF and coating from Darien Detail in CT.
Xpel Ultimate Full Frontal Coverage
-Final Polishing
-Headlights wrapped
-Full Hood
-Full Front Bumper
-Full Front Fenders
-Mirrors
-Windshield surround
-Full Rocker Panel Coverage in Xpel Ultimate
-CQuartz Finest Reserve
-Wheels and Calipers Coated
Also, I spent 35+ hours on the car, polishing, cleaning and protecting the interior, plastic trim, glass, rubber seals, convertible top, exhaust tips, carbon fiber, taillights, plastic window, and cleaning underside of the vehicle. I also installed a new front spoiler; since the previous owner scraped it up a bit.
very very nice. I just moved to Rowayton, CT and went to Darien Detail for a quote not too long ago. Owner gave me a quick tour, and the place is an extremely professional outfit. Looking to bring mine in soon for some correction and new ppf.
Side question - do you ever meet up with fellow Cayman owners in the CT area?
very very nice. I just moved to Rowayton, CT and went to Darien Detail for a quote not too long ago. Owner gave me a quick tour, and the place is an extremely professional outfit. Looking to bring mine in soon for some correction and new ppf.
Side question - do you ever meet up with fellow Cayman owners in the CT area?
Thanks, guys appreciate it, put a lot of hard work into this one. Dirk and the crew at DD are great, this is the second vehicle they have done for me. I go to as many Cars & Coffees as possible. This Sunday there is a PCA coffee run I plan to attend.
Wind Mill Coffee Run by James Ball
Starbucks in Stamford, CT to 5 Guys in Westport, CT
Drivers meeting at 8:30am, on the road at 9am. The will be rest stop about an hour into the drive. Total distance is approximately 66 miles.
Our drive will take us through West Chester and Fairfield counties where we pass actual wind mills in Armonk, NY.
Starting point will be at Starbucks, 1089 High Ridge Road, Stamford, CT 06905 (address for GPS) (Merritt north or south to exit 35 High Ridge Road, from south bound Merritt, right off exit, 2 traffic lights and left to High Ridge shopping center, from Merritt north bound make a right at light, go 1 lights, left to High Ridge shopping center parking lot.) Coffee, bathrooms, gas within a 1⁄2 mile.
We will end the tour at 5 Guys Burgers 534 Post Rd E, Westport, CT for lunch as a group if you are interested, each individual is responsible for paying for their lunch.
Wow... such an amazing looking car. When you say "restoration" and "better than new", are saying that because the car was wrecked or damaged in some way?
Wow... such an amazing looking car. When you say "restoration" and "better than new", are saying that because the car was wrecked or damaged in some way?
Sorry, for the confusion, not at all 3600 miles one owner as good as it gets. I enjoy detailing and am meticulous about maintaining my cars. Even when I purchase new, the paint gets cleaned and polished before coating and PPF etc., just me being me, paint is now "perfect" definitely better than when new. All new cars come from the factory with some level of imperfection, depending on how the dealer washes and treats the car it only gets worse. Here is the section around the rear emblem after I polished it.
Oh, I understand... I thought maybe you bought a wrecked Spyder and have been restoring it to brand new condition. Well, regardless, the car looks amazing. Any pics of the interior?
I wish I had the patience, equipment, and skill to get my car to this level. Sadly, I'll likely have to pay someone else to do it, and it will be catastrophically expensive.
My car has almost 55k miles on it, and the factory ppf is not doing so well. The paint is acceptable but far, far from perfect and has a few rock chips that either have already been (not very well) repaired or need repairing. Some preliminary research on pricing has me somewhere in the $2500 range for full correction and ppf, and then coating on top of that would drive that up more unless I find a shop willing to cut me a deal.
Which is why I'm actually considering learning to at least do the correction myself. I know it will be a significant upfront investment in both time and money, but probably not much more than it would cost for me to pay someone to do it, plus I'd gain a new skill and have the equipment to show for it.
I still have a couple months of too-hot-to-bother weather here in the midatlantic, and then I have a choice to make.