FS sleeved S2 block + matching pistons, very low hours
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
FS sleeved S2 block + matching pistons, very low hours
Sleeved S2 block with matching JE pistons, stock 3.0 pin height. Add your crank and rods and make a 3.0 turbo. Only a few hours run time before being torn down again due to tuning problems. Want to make my own 3.0, but everything has a price... Also have 968 crank needing repair for extra.
Willing to sell pistons separately to someone with their own block to be sleeved. Bought block+pistons second-hand but was told only about 5 hours run time on these pistons. My sketchy micrometer shows actual bore at 4.127 or 4.128".
In the more immediate-term I think a regular 2.5 factory-style turbo engine will work for me - 3.0 not needed yet for my uses.
Aiming for $1300+ship for block+pistons, but open to offers, or maybe work out a trade for a running 2.5 951 engine.
Willing to sell pistons separately to someone with their own block to be sleeved. Bought block+pistons second-hand but was told only about 5 hours run time on these pistons. My sketchy micrometer shows actual bore at 4.127 or 4.128".
In the more immediate-term I think a regular 2.5 factory-style turbo engine will work for me - 3.0 not needed yet for my uses.
Aiming for $1300+ship for block+pistons, but open to offers, or maybe work out a trade for a running 2.5 951 engine.