Door Panel Question
01-18-2015, 08:09 PM
#1
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
Door Panel Question
Apparently the late model 944 door panels fit on a 968?
But I also understand from my weekend reading that the 944 panels are not as welll made as the 968, true?
But I also understand from my weekend reading that the 944 panels are not as welll made as the 968, true?
01-18-2015, 08:39 PM
#2
Rennlist Member
968 door panels are fancier with more styling to them. There are a few full leather 968s out there that have full leather door panels.
01-22-2015, 04:54 PM
#4
Drifting
Where there ever aftermarket panels made for the 944/968? I found a set of panels from a 944 turbo, to replace my old 968 ones since I am remove the 10 speaker cards.
Car is my track car but I want to keep it some what decent looking, even if it is not all original.
One of the original 968 panels is only held together by glue and vinyl since water got in and broke down the pressed cardboard that makes the panel.
The other driver's panel has the drooping by the window slit syndrome, i assume form people putting their arm there over the years.
Car is my track car but I want to keep it some what decent looking, even if it is not all original.
One of the original 968 panels is only held together by glue and vinyl since water got in and broke down the pressed cardboard that makes the panel.
The other driver's panel has the drooping by the window slit syndrome, i assume form people putting their arm there over the years.
01-23-2015, 09:43 AM
#5
Rennlist Member
Where there ever aftermarket panels made for the 944/968? I found a set of panels from a 944 turbo, to replace my old 968 ones since I am remove the 10 speaker cards.
Car is my track car but I want to keep it some what decent looking, even if it is not all original.
One of the original 968 panels is only held together by glue and vinyl since water got in and broke down the pressed cardboard that makes the panel.
The other driver's panel has the drooping by the window slit syndrome, i assume form people putting their arm there over the years.
Car is my track car but I want to keep it some what decent looking, even if it is not all original.
One of the original 968 panels is only held together by glue and vinyl since water got in and broke down the pressed cardboard that makes the panel.
The other driver's panel has the drooping by the window slit syndrome, i assume form people putting their arm there over the years.