SpeedBump

Konis would probably be cheaper, not sure about better. Kw ,Leda, Moton, etc would be more expensive.

Joel8005

Ah. just as I thought the infamous "slippery slope."

This web site has been great fun so far, not to mention wealth of knowledge.

Cheers,
Joel

RajDatta

Not sure if Ledas are available anymore. Motons are in a different league price and adjustability wise.
Raj

StewHatch

Do you have to remove the torsion bars once coil-overs are installed?

RajDatta

In the rears, not really. You can run them in conjunction or as standalones. The torsion bars give you some added spring rate but limitations in adjustability.
Raj

PorscheDude1

Leda is alive....
http://www.leda.com/

boost feen

The front 951 turbo S spindles are still available and new they are $1,300 a piece from Sunset! You then need hubs, calipers, bearings, dust caps, etc...... The rear shocks have permanent hats and the barrel shaped springs that go on them come in a set but its about $600 for the rear factory coilover setup! Somewhere around 80lbs I belive!

968workaholic

Stew, you can run aftermarket coilovers with the torsion bars installed. But, if you run a spring that is more than 80 lbs, you will need to reindex them in the housing.

StewHatch

This is great info. Thanks a million guys. This will be invaluable when I make my changes.