968 conversion to fixed 993 or 996 headlights...
#16
Instructor
Join Date: Aug 2006
Location: San Francisco, Ca Midnight blue '94 968
Posts: 161
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
the problem is they blind everyone by throwing glare everywhere... as such, not only can everyone else not see, but neither can you because very little of the light is actually going on the road.
In addition to that, using something like an 8300k hid bulb actually puts out a good bit less light than normal halogen headlights and in a color spectrum that isn't all that useful.
In addition to that, using something like an 8300k hid bulb actually puts out a good bit less light than normal halogen headlights and in a color spectrum that isn't all that useful.
#17
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am interested to know if there are popups available for 996?
If the original lights are open for discussion, how about installing popups instead? 968 or 928 would be a good candidate.
If the original lights are open for discussion, how about installing popups instead? 968 or 928 would be a good candidate.
#18
Team Owner
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There are many ways to go about this. I don't think there is any "easy" or "simple" way about it though. Some people make custom enclosures, and I've seen at least one car with the 993 lights installed, but that was very involved and required the fenders to be cut.
This car is somewhat famous/infamous around here and I saw it on ebay a few months ago.
http://www.cardomain.com/ride/672113
This car is somewhat famous/infamous around here and I saw it on ebay a few months ago.
http://www.cardomain.com/ride/672113
This is done by liberal cutting, adding a some sheet metal, and reshaping.
i brought my fenders to their general shape with this method,
Fine shaping was accomplished by adding quality epoxy composite,
and finishing resins for fine shaping.
result:
8+ years of bliss.
(despite adding some materials to the fenders (unavoidable)
(if done right), you're looking at a 15~20 lb weight savings.
Be wrong. Just wrong.
997 headlamp kit for the win.
https://www.wickedmotorworks.com/par...p?partid=10098
Last edited by odurandina; 11-25-2020 at 08:23 PM.
#20
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
World does not need MORE blue light.
It is supposed to increase sleeplessness.
Yellow street lights have been proven to lower crime too!
-Yogii
AKA 968 Novice