cgfen

to no ones surprise, the male connector at the end of my car's CPS is crumbled dust.
I know I can buy replacement sensor

https://www.pelicanparts.com/search/...ition%20sensor

Is there a source to purchase the mating "female" connector and re-pin it? I thought that I had bookmarked a vendor, but now can't find it.
I'm also surprised I can't find a DIY for CPS R&R either here or on Clark's Garage. Do you know of one?

Thanks

Craig

931guru

https://www.ebay.com/itm/195952915905

Zirconocene

I have some of the female connectors, if you need one, along with the seals and terminals. They're available through eBay, similar to what's linked above, but also through places like Mouser, Digikey, etc.

Example 1, male version: https://www.digikey.com/en/products/...581-2/10468547
Example 2, female version: https://www.digikey.com/en/products/...82191-1/744837

Both way less expensive than what you might find from other vendors, but it does make you hunt around a little bit to assemble all the other bits.

Cheers

cgfen

Thanks for the input.


I'll either buy 1 male and 1 female 3 pin connector ($24 each) from 944 online https://944online.com/

or 1 CPS assembly plus the matching 3 pin connector from them

I also found a DIY on Pelican that discusses removing the "cam cover" to access the CPS fasteners
https://forums.pelicanparts.com/pors...d-replace.html