Turbo Rings for 968 - p/n?
#1
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
Turbo Rings for 968 - p/n?
There was a set of these on eBay recently - does anyone know the p/n?
Also - do they fit the standard pistons - or are the ring lands different?
TIA-
Also - do they fit the standard pistons - or are the ring lands different?
TIA-
#3
Race Car
I have a set of brand new factory 968 Turbo S piston rings.
At a glance the top compression ring is thicker with a larger gap than the stock 968 one, and the chamfers on the top two rings are exactly the same [45 degrees] as the stock rings.
At a glance the top compression ring is thicker with a larger gap than the stock 968 one, and the chamfers on the top two rings are exactly the same [45 degrees] as the stock rings.
Last edited by PorscheG96; 01-20-2004 at 03:53 PM.
#5
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
Originally posted by 968TurboS
Based on the conversation I had with the person selling them, they are for the standard piston. Let me know if you need their contact info.
Based on the conversation I had with the person selling them, they are for the standard piston. Let me know if you need their contact info.
Thanks-