fc-racer

I've been looking all over the Internet for pics of front splitters for the 964 Turbo. So far, I've found the factory 3.6T dual splitters and some aftermarket replicas of that, but I haven't found anything in addition to that. Can anyone point me in the right direction or post up pics they have of their cars with splitters. Thanks!

fc-racer

SonnyV

fc-racer,

What are 964 Turbo front splitters? I have been looking for splitters like the one from a '94 3.6 Turbo S for a while now. Take a look at this website to see if they are what you're looking for.
http://www.flachbau.com/home.htm or http://www.flachbau.com/1994_turbo.htm

Sonny Vo

fc-racer

Those splitters are the ones that seem to have come from the factory on the 3.6 Turbo, not necessarily the Turbo S. I'm not sure if it was an ROW thing or a worldwide, but almost every picture of a 3.6T I've seen has those splitters if they are in ROW.

Weissach Performance can order those in for me from Porsche, but I wanted to know if there was anything else out there, perhaps something more aggressive.

Had a chance to really open up the C2T tonight, she's got quite the legs, very smooth, very fluid power. It isn't the thrill ride I expected, more a sophisticated speed. A little extra boost should make it a bit more thrilling

fc-racer

K27

Not sure if they still do 964 aerodynamics cause they only have from 993 on the web site, but they are a class act. http://www.gemballausa.com/

Mark S.

The splitters on the 3.6 Turbo S were originally on the 3.8RS. The U.S. 3.6 Turbo did not have these splitters. I also don't believe that the stock ROW 3.6 Turbo's had them either.

Sonny - here are the part numbers for the splitters. It may take a awhile for a U.S. dealer to get them from Porsche so you may want to buy them directly from a dealer in Germany and get them shipped over (in which case you will get them in a few weeks and they cost about 560DM each). I may also have a used set to sell in the near future as I am going to replace mine with a new set. I'll let you know.

965.504.125.02 and 965.504.126.02

Regards,
Mark

SonnyV

Marc,

Thanks for the information. How much is 560DM in US Dollars? Anyone?

Regards,

Sonny Vo
ps: Love your car. I would get this car over a 993TT or 996TT anyday of the week. In fact, if I ever get a chance to upgrade, I will look for one of these 3.6 Turbo S flatnose.

tasracer

looking for those splitters myself for a while... windward perf has something like a one piece chin spoiler for 599.00... goto their site, pics of their 94 3.6t d class racer... still i want the dual splitters

fc-racer

The factory splitter is priced at C$1306ea or about US$816ea. They need to be special ordered from Germany. So, I say forget that! Time for an alternative as it's going to get smashed off at some point anyway. FVD has something that looks interesting, I might try them. Any others that anyone recommends?

MA Shaw and GT racing must have something.

Farzaan