Cheap front splitters
01-26-2007, 12:14 PM
#1
Three Wheelin'
Thread Starter
Join Date: Dec 2006
Location: Texas
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Cheap front splitters
Found these on Ebay and got a set. He has several.
They are indeed for a 964 and are fiberglass.
Mine had a small chip to fill but decent shape. Will look fine painted black.
Fitment is 8/10 or better.
http://cgi.ebay.com/ebaymotors/Porsc...mZ290060911123
RT
They are indeed for a 964 and are fiberglass.
Mine had a small chip to fill but decent shape. Will look fine painted black.
Fitment is 8/10 or better.
http://cgi.ebay.com/ebaymotors/Porsc...mZ290060911123
RT
01-26-2007, 01:13 PM
#4
Three Wheelin'
Thread Starter
Join Date: Dec 2006
Location: Texas
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
They just listed incorrectly.
I have a set and mated with the underpanels and fit is good.
9/10 with a little effort.
They do actually look carbon but it is the weave of the fiberglass. They are greyish in color and could probably pass as CF down that low.
RT
No relation to seller. Just passing along.
I have a set and mated with the underpanels and fit is good.
9/10 with a little effort.
They do actually look carbon but it is the weave of the fiberglass. They are greyish in color and could probably pass as CF down that low.
RT
No relation to seller. Just passing along.
01-26-2007, 01:19 PM
#6
Three Wheelin'
Thread Starter
Join Date: Dec 2006
Location: Texas
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Havent yet.
Thinking rivets and posibly some contact cement.
That was suggested by Anthony/Cobalt who has the real deal splitters.
I like them but $40 vs. $500 for something that low and is bound to get scraped...
Probably will be awhile before I mess with it since I have a wedding coming up.
RT
Thinking rivets and posibly some contact cement.
That was suggested by Anthony/Cobalt who has the real deal splitters.
I like them but $40 vs. $500 for something that low and is bound to get scraped...
Probably will be awhile before I mess with it since I have a wedding coming up.
RT
01-26-2007, 01:24 PM
#7
Three Wheelin'
Join Date: Apr 2006
Location: London, England
Posts: 1,977
Likes: 0
Received 0 Likes
on
0 Posts
I'll beat you to it then.
Mine have been fitted this week by my garage. When I pick up the car tomorrow will see and post pics when I can.
PS: New suspension also, can't wait!
Mine have been fitted this week by my garage. When I pick up the car tomorrow will see and post pics when I can.
PS: New suspension also, can't wait!
Last edited by 911addict; 01-27-2007 at 01:04 PM.
Trending Topics
01-26-2007, 04:40 PM
#8
Pro
Join Date: Nov 2005
Location: NJ
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
I have the CF version (MA Shaw) and it does require some creative installation to make it look right. Like cement, 3M black sealant, wood screws, toggle bolts and a heat gun. After I finished it looks very good. By NO MEANS are they bolt on pieces. YOU GET WHAT YOU PAY FOR!!!!!!!!!!!!!
01-26-2007, 04:47 PM
#9
Three Wheelin'
Thread Starter
Join Date: Dec 2006
Location: Texas
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Y65MPH
I have the CF version (MA Shaw) and it does require some creative installation to make it look right. Like cement, 3M black sealant, wood screws, toggle bolts and a heat gun. After I finished it looks very good. By NO MEANS are they bolt on pieces. YOU GET WHAT YOU PAY FOR!!!!!!!!!!!!!
BTW...NO DUCT TAPE?!?!?
Hold off on purchasing as I got a great deal to purchase all the sets he has. I will passing the savings on to you guys. 3 sets at $30 each + ship is my anticipated offering.
RT
01-27-2007, 10:22 AM
#10
Three Wheelin'
Join Date: Apr 2006
Location: London, England
Posts: 1,977
Likes: 0
Received 0 Likes
on
0 Posts
Mine are now fitted.
They were from Rennspeed (sponsor?) and only cost $95. They look like the ones Ag has posted ie. plastic with 'weave'. The outside is quite smooth and so we didn't paint them. They simply bolted on to existing small lip. According to the website they are the same design as the 3.8RSR but I suspect they may be 3.3 S (anyway they are the 2 pieces not the single). I am very pleased and will post pics soon after I wash the car!
They were from Rennspeed (sponsor?) and only cost $95. They look like the ones Ag has posted ie. plastic with 'weave'. The outside is quite smooth and so we didn't paint them. They simply bolted on to existing small lip. According to the website they are the same design as the 3.8RSR but I suspect they may be 3.3 S (anyway they are the 2 pieces not the single). I am very pleased and will post pics soon after I wash the car!
01-30-2007, 12:41 PM
#13
I'd like a set. Please email me at lwilkins44@yahoo.com and we'll get payment and shipping info.
Thanks!
Thanks!
Originally Posted by Ag02M5
I like creativity and projects so this should be right up my alley!
BTW...NO DUCT TAPE?!?!?
Hold off on purchasing as I got a great deal to purchase all the sets he has. I will passing the savings on to you guys. 3 sets at $30 each + ship is my anticipated offering.
RT
BTW...NO DUCT TAPE?!?!?
Hold off on purchasing as I got a great deal to purchase all the sets he has. I will passing the savings on to you guys. 3 sets at $30 each + ship is my anticipated offering.
RT
