When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Where did you order from? Looking to get some sways for my C4 and I love inexpensive mods
Dubjager:
Found them on Ebay. The seller is a dismantler and has a few listed for only $75...not sure if they are all gone or not. Seemed too cheap not to give it a try!
Dubjager:
Found them on Ebay. The seller is a dismantler and has a few listed for only $75...not sure if they are all gone or not. Seemed too cheap not to give it a try!
Thank you for the heads up, just ordered one myself!
Originally Posted by DobermanDad
I just got mine in the mail yesterday, from Flying Tomato. Can't wait to install it. Waiting for some new hardware and bushings to come.
What hardware/bushings are you going with for the bar?
From what I hear the rear not hard. I was checking it out while under the 964, it's right there, nothing in the way or anything. Hmmm....wonder if I should replace those lock nuts? The only replacement I found for those are the Porsche ones, not sure if there is anything special about them. It's just the pitch Porsche uses on them is unique. Usually they are 1.75 vs the 1.5 Porsche used.
From what I hear the rear not hard. I was checking it out while under the 964, it's right there, nothing in the way or anything. Hmmm....wonder if I should replace those lock nuts? The only replacement I found for those are the Porsche ones, not sure if there is anything special about them. It's just the pitch Porsche uses on them is unique. Usually they are 1.75 vs the 1.5 Porsche used.
The front on the other hand is a PITA.
Yeah, I was thinking about just purchasing new hardware and replacing it all. If the bolts are in the same shape as those on my secondary/cat then they will likely need to be replaced anyway!
I'd replace them while you're at it. Won't hurt. I bought a bunch of Grade 8 M8 bolts and some spring washers. Actually have a ton of them now LOL! Could only get them in bulk.
Looked into that lock nut. It's part #99908444501 now.
Back in the day I replaced both in the C4 when I did the KW V3 suspension... I didn't know better so I splurged on a 24mm front and 26mm rear from H&R. Sounds like that was overkill?