DobermanDad

Going the check list to see what's going on with my PDAS / ABS warning lights.

I took the relay out to check it, is it supposed to rattle when you shake it? Mine sounds like something is loose and ratting around in there.

jimq

you should be able to pull the top off and see whats in there.

mickym0u53

It's a sheet of plastic that separates the metal casing from the solder joints on the PCB board. Just jump pin 30 and 87 on fuse panel to see if lights go away. If it does then the relay could be bad. The relays are notorious for broken solder joints and circuit boards with broken circuit tracks.

Turbohead

I have this unit if you need it.

DobermanDad

I may need this. Still have to go thru my list to see what's going on.

Gonna check the relay as describe above, and bleed the entire system.