964 WHEELS: Kerscher FX 18"
Drifting
Joined: Feb 2013
Posts: 2,360
Likes: 6
From: UK
Meaning that your ride height and geometry may need tweaking in order for the wheels & tyres to clear everything properly.
I haven't seen this specific model on any Rennlister cars, however I have heard good feedback on other Kerscher models.
Thread Starter
AutoX
Joined: Feb 2014
Posts: 12
Likes: 0
I really don't want spacers becox I dun want the car to vibrate/wobble...
Last question: suppose if this offset is still too aggressive fitted into my narrow body....I can still takeout the plastic wheel liners and roll the fenders for further clearance yea??? If u were here we should be discussing this topic tonight over drinks, my treat
Drifting
Joined: Feb 2013
Posts: 2,360
Likes: 6
From: UK
Thank you Betty for being very specific. I will need to buy new suspensions as my rear suspensions are extra low while the fronts seems to be OK...According to my mechanic, I'm running some weird suspension right now in which it's not for the 964, but it's for Porsche....weird from the previous owner hmmmm...
I really don't want spacers becox I dun want the car to vibrate/wobble...
Last question: suppose if this offset is still too aggressive fitted into my narrow body....I can still takeout the plastic wheel liners and roll the fenders for further clearance yea??? If u were here we should be discussing this topic tonight over drinks, my treat
I really don't want spacers becox I dun want the car to vibrate/wobble...
Last question: suppose if this offset is still too aggressive fitted into my narrow body....I can still takeout the plastic wheel liners and roll the fenders for further clearance yea??? If u were here we should be discussing this topic tonight over drinks, my treat
There is nothing wrong with spacers if they are correctly used with longer wheel carrier studs when over 5mm. I run 15mm rear spacers on track...
Removing the wheel arch liners isn't the best of ideas, however I and as have a few members have cut out sections that were causing rubbing.
Rolling the arch lips is of course an option, however old paint can crack even when pre heated.
Do you know what ride height you are attempting to achieve? Do you have a picture?
Thread Starter
AutoX
Joined: Feb 2014
Posts: 12
Likes: 0
Hi,
There is nothing wrong with spacers if they are correctly used with longer wheel carrier studs when over 5mm. I run 15mm rear spacers on track...
Removing the wheel arch liners isn't the best of ideas, however I and as have a few members have cut out sections that were causing rubbing.
Rolling the arch lips is of course an option, however old paint can crack even when pre heated.
Do you know what ride height you are attempting to achieve? Do you have a picture?
There is nothing wrong with spacers if they are correctly used with longer wheel carrier studs when over 5mm. I run 15mm rear spacers on track...
Removing the wheel arch liners isn't the best of ideas, however I and as have a few members have cut out sections that were causing rubbing.
Rolling the arch lips is of course an option, however old paint can crack even when pre heated.
Do you know what ride height you are attempting to achieve? Do you have a picture?
Apologies for the late reply! The below pic is how I want my car to look exactly alike to! I asked around but nobody seem to work out what size and offsets they are! Thankyou very much! I have spacers right now on my Exige S for 2months now,,,,and I'm already considering to take them off already
I will only use the 964 for street use only. Thank you and please reply shortly! Hope once I settle with a correct offsets I will order them right away, can't wait!!!!
Drifting
Joined: Feb 2013
Posts: 2,360
Likes: 6
From: UK
Good morning Betty!
Apologies for the late reply! The below pic is how I want my car to look exactly alike to! I asked around but nobody seem to work out what size and offsets they are! Thankyou very much! I have spacers right now on my Exige S for 2months now,,,,and I'm already considering to take them off already
I will only use the 964 for street use only. Thank you and please reply shortly! Hope once I settle with a correct offsets I will order them right away, can't wait!!!!
Apologies for the late reply! The below pic is how I want my car to look exactly alike to! I asked around but nobody seem to work out what size and offsets they are! Thankyou very much! I have spacers right now on my Exige S for 2months now,,,,and I'm already considering to take them off already
I will only use the 964 for street use only. Thank you and please reply shortly! Hope once I settle with a correct offsets I will order them right away, can't wait!!!!
You'd have to ask one of the dub guys here - not my sector.
Thread Starter
AutoX
Joined: Feb 2014
Posts: 12
Likes: 0
Burning Brakes
Joined: Dec 2013
Posts: 914
Likes: 1
From: Athens AL
my parts are coming together
image-1354184085.jpg
image-1227610438.jpg
image-952593321.jpg
image-744092753.jpg
image-1354184085.jpg
image-1227610438.jpg
image-952593321.jpg
image-744092753.jpg
Rennlist Stories
The Best Porsche Posts for Porsche Enthusiasts
Every Era of 911 Owner Explained in One Sentence
Verdad Gallardo
Thinking of Buying a Porsche? Do These 10 Things First
Joe Kucinski
Pixar Pals Turned Into 1-of-1 Porsches!
Michael S. Palmer
Theon Goes Full Carbon Fiber With Stunning New Build
Verdad Gallardo
Genius Porsche-Themed Gifts That'll Make Any Dad or Grad Smile
Joe Kucinski
10 Used Porsches Are Selling for Way Too Cheap
Joe Kucinski
Tuner Is Converting Porsche 911s Into Shooting Brakes
Verdad Gallardo
This Coachbuilt Creation Is A Modern Take on the Legendary Porsche 917
Verdad Gallardo
Is This Convertible Cayenne A Steal, Or A Returnless Investment?
Verdad Gallardo
Burning Brakes
Joined: May 2013
Posts: 804
Likes: 304
From: The Rocket City
Burning Brakes
Joined: Dec 2013
Posts: 914
Likes: 1
From: Athens AL
Instructor
Joined: May 2013
Posts: 215
Likes: 1
From: manhattan beach ca
