America Roadster emblem script
#18
Drifting
#19
1. yes you are absolutely right - same for Turbo ...
2. yes all four 1994-VIN Roadsters were M718 coded
Best Norbert
P.S
I gave my Roadster badge to create a Reproduction - there are still some left of these, but they did not realize the correct backside so the glue-section is not the same.
As a 10 pieces production pretty expencive in the end - i think the dealer asks for about 130 Euro - but anyway if someone needs one - i can make the contact.
#20
Rennlist Member
I saw this today - so a bit delayed answer, Anthony
1. yes you are absolutely right - same for Turbo ...
2. yes all four 1994-VIN Roadsters were M718 coded
Best Norbert
P.S
I gave my Roadster badge to create a Reproduction - there are still some left of these, but they did not realize the correct backside so the glue-section is not the same.
As a 10 pieces production pretty expencive in the end - i think the dealer asks for about 130 Euro - but anyway if someone needs one - i can make the contact.
1. yes you are absolutely right - same for Turbo ...
2. yes all four 1994-VIN Roadsters were M718 coded
Best Norbert
P.S
I gave my Roadster badge to create a Reproduction - there are still some left of these, but they did not realize the correct backside so the glue-section is not the same.
As a 10 pieces production pretty expencive in the end - i think the dealer asks for about 130 Euro - but anyway if someone needs one - i can make the contact.
I don't need the badge i have been collecting them I had an RS America badge that somehow never got returned to me when I had my RSA tail painted.
#24
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 267 Likes
on
154 Posts
Late to the party as usual..that being said, I'm bringing this up again.
Does anyone know of a source for the Roadster script emblem?
You would think with 3D printing this could be replicated pretty easily, no?
Any sources or leads greatly appreciated!
Does anyone know of a source for the Roadster script emblem?
You would think with 3D printing this could be replicated pretty easily, no?
Any sources or leads greatly appreciated!
#26
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 267 Likes
on
154 Posts
#27
man, that guy has a problem. I found a 3D printed one but I don't like it
There is a 3d printed badge on ebay for $125. It does not look like it would work. Plus I doubt very much it has the groove on the back where that VERY thin double sided tape goes.
http://www.ebay.com/itm/191951720297?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The following users liked this post:
jimholden (04-09-2020)
#30
Pro