Alternator and fan pulleys
10-15-2012, 06:22 PM
#1
Instructor
Thread Starter
Alternator and fan pulleys
Hi all - I had a quite the DIY experience when my cooling fan bearing went bad and welded all my pulleys and shims together.
There is a bunch of great info already here but I just wanted to share with everyone that the new updated pulleys for the 993 DO WORK on the 964. They are quite a bit cheaper as well. I was about to custom order the originla 964 pulleys at a cost of over $100 a piece, the 993 pulleys were about $50 bucks each. I driven over 100 miles on the updated pulleys and they are working perfectly...just thought I share.
There is a bunch of great info already here but I just wanted to share with everyone that the new updated pulleys for the 993 DO WORK on the 964. They are quite a bit cheaper as well. I was about to custom order the originla 964 pulleys at a cost of over $100 a piece, the 993 pulleys were about $50 bucks each. I driven over 100 miles on the updated pulleys and they are working perfectly...just thought I share.
Last edited by mc_renn; 10-15-2012 at 06:23 PM. Reason: spelling
