Restoring Fan & Housing question... use what type media for blasting?
#1
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Going to restore the fan and housing by having them blasted and then Gibbs treatment.
What media is safe to be used? I've heard soda, anything else?
How about pressure, low?
Will post pics when done.
What media is safe to be used? I've heard soda, anything else?
How about pressure, low?
Will post pics when done.
#3
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Walnut shells work great, especially if you decide to also blast the valve covers (inside and outside).
#7
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I had my fan and housing powder coated and I know they blasted it prior to coating but I have no idea how or with what.
Anyway, the coating on both parts went on rather thick and now I get some marking of the fan (yellow) on the housing (silver). It's only a couple of blades and it is very light. Actually, when spun by hand there is no contact, but when spun up to high revs, it somehow rubs lightly but enough to mark. It was a fan I sourced 2nd hand so it's not perfect. I'm just gonna roll w/ it and keep an eye on it.
Anyway, the coating on both parts went on rather thick and now I get some marking of the fan (yellow) on the housing (silver). It's only a couple of blades and it is very light. Actually, when spun by hand there is no contact, but when spun up to high revs, it somehow rubs lightly but enough to mark. It was a fan I sourced 2nd hand so it's not perfect. I'm just gonna roll w/ it and keep an eye on it.
Trending Topics
#9
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mine got powder coated by a horrible powder coater. I have regretted it since. And is now all cracked from heat and the powder coat looks horrible...so be careful who you choose.
Next round is bead blast mine and do the same, leave naked...
I'd still like to see pics of fans and housing...love this stuff...
Next round is bead blast mine and do the same, leave naked...
I'd still like to see pics of fans and housing...love this stuff...
#14
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I used a scotchbrite pad to roughen the surface, then sprayed mine with Hammerite Bright Yellow (Smoothrite actually).
Its been as gold as gold for a numer of years now.
Kevin
Its been as gold as gold for a numer of years now.
Kevin