964 Warning Lights
#16
Rennlist Member
I am sorry, I have no experience in ordering these parts.
I guess a Porsche dealer or Pelican can help you.
Cheers,
Tore
I guess a Porsche dealer or Pelican can help you.
Cheers,
Tore
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
-Luccia
__________________
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
#18
Racer
Thank you,
Chris
#19
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#22
Racer
FWIW I tried to find the arching in the dark at night with the mist and couldn't see anything. If yer not sure what needs to be changed you should probably just change everything at one. I did Cap, rotor, wires, plugs and coils. Problem solved.
The only pricey part were the wires.
The only pricey part were the wires.
#24
Rennlist Member
#25
As long as you ends are good you can go this route. I snag a set of used ones that are in better shape. A lot of guys have them laying around their garages.
They sell wire kits that are precut to length for our cars. Think in red and in blue. Believe you need a crimping tool, not expensive.
There may me something on here out it. I know I'm going that route when I need new wires.
I'm sure there's stuff online how to do it. Just haven't done the research yet, but know it can be done.
Just need some parts off your old harness.
They sell wire kits that are precut to length for our cars. Think in red and in blue. Believe you need a crimping tool, not expensive.
There may me something on here out it. I know I'm going that route when I need new wires.
I'm sure there's stuff online how to do it. Just haven't done the research yet, but know it can be done.
Just need some parts off your old harness.
#28
12 spark plugs vs 6 spark plugs and all the special seals the hold them in the tins.
If you know what you're looking for you can get 25 foot rolls of 8.5mm red super conductor wire the for about $50 - $60. Summit racing among many others sells it and other types.
I haven't checked the specs on the wire required for our cars yet though. Just poking around the internet a bit. To many projects at the moment, don't really need to start another and my current wires a still good. I'm sure someone will chime in on the type needed. I'd actually like to know. Would be good project. Red ones would look great too.
If you know what you're looking for you can get 25 foot rolls of 8.5mm red super conductor wire the for about $50 - $60. Summit racing among many others sells it and other types.
I haven't checked the specs on the wire required for our cars yet though. Just poking around the internet a bit. To many projects at the moment, don't really need to start another and my current wires a still good. I'm sure someone will chime in on the type needed. I'd actually like to know. Would be good project. Red ones would look great too.
#30
+1 on the coils. What I have learned is to go with the thing most of the people say. It may not make sense to you, but it works. This forum is great when it comes to common issues. The coils worked for me.