Distributor Rebuild?
#1
Instructor
Thread Starter
Join Date: Nov 2005
Location: Tucson, AZ
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Distributor Rebuild?
I know a while back, a few rennlist members were rebuilding distributors that had failed belts. Is anyone still doing this, or can someone recommend a shop that will rebuild your distributor if you send it in? I've searched but most of the treads are a few years old, and I don't know if the recommendations are current.
Thanks Guys,
James
Thanks Guys,
James
#3
Instructor
Thread Starter
Join Date: Nov 2005
Location: Tucson, AZ
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking of doing it my self, but I figured I would see what others charge to do it. I figured that if it wasn't too much I would just send it out. If it's more than I want to pay then at least I'll know how much it will cost me if I mess it up.
#4
RL Technical Advisor
James,
We've been offering this service for 12+ years,.....
We usually completely disassemble these units and check all 4 bearings when the belt is replaced, too.
E-mail me directly for more info if I can help.
We've been offering this service for 12+ years,.....
We usually completely disassemble these units and check all 4 bearings when the belt is replaced, too.
E-mail me directly for more info if I can help.