F2 Iceland

I'm finally starting this now after owning the kit for more than a year now,, Everything is apart but i don't have the installation quide... execpt for whats shown on vivid racing....

The problem is i need a templete or stencil to know where to drill in the frame? don't know what to call it in the back of the engine and this templete is not shown on tpc site or vivid racing and both aren't answering my emails


i need this templete

http://www.vividracing.com/catalog/p...tpc993-964.pdf what i'm
talking about this figure 9d on page 8

MechanicalEng

did u try calling Casey?

Casey Parkin
TPC Racing
Marketing/Sales
cparkin@tpcracing.net
410.799.7223

Colin 90 C2

looks like the template is on a standard 8.5x11 paper.
you will have to interpolate the results back to your engine carrier.
should be pretty simple.

haygeebaby

Iceland
Good luck with the install. I am very interested in this project as well - TPC SC is on my list as well. Think you could do the list a big favour and take pictures and document your install for us all ? Would be must appreciated.

Either way - hope it goes smoothly.

Regards

Ken