Brake slipping feel through pedal and ABS/warning lights on
#18
Dear Don
A simpler test than the one I suggested above is to measure the resistance of each speed sensor. The sensor is a coil of wire wrapped around an iron core. With the meter set on ohms, connect the 2 leads to the 2 contacts on the sensor connector. Select the lowest resistance range on the meter which still produces a reading. Any sensor that does not compare to the others in resistance may be suspect.
Bill
A simpler test than the one I suggested above is to measure the resistance of each speed sensor. The sensor is a coil of wire wrapped around an iron core. With the meter set on ohms, connect the 2 leads to the 2 contacts on the sensor connector. Select the lowest resistance range on the meter which still produces a reading. Any sensor that does not compare to the others in resistance may be suspect.
Bill