FS: 18" RH 3 piece Speedline 965 3.6 Turbo Wheels
#1
Rennlist Member
Thread Starter
Join Date: Oct 2007
Location: Racking up air miles....
Posts: 3,660
Likes: 0
Received 552 Likes
on
243 Posts
FS: 18" RH 3 piece Speedline 965 3.6 Turbo Wheels
I purchased these a few months ago for my 951 in anticipation of restoring them over the winter. The lips that came with them were quite scarred, so I decided to purchase 4 brand new polished lips from Germany, which cost me close to $800 including the shipping. I disassembled one front & one rear when the lips arrive to ensure that they would fit properly & they are snug... The original lips will also be supplied so that you can refinish them for spares or to sell (you could make some money as they sell for over $200 each)...
I have not touched the other two, so they would need to be disassembled & all four re-assembled. All of the nuts & bolts seem to be in excellent condition & I made sure to bag & mark each wheel's bolts & nuts (I did quite a bit of research prior to taking them apart & I did it with care).
The centers are in very good condition - I had planned on refinishing / repainting them, though you could probably get away with using them as is.
The specs are:
18x8 et52
18x9.5 et47
These are a direct fit for most 944/964/993/996 cars (wide bodies may need a spacer)
Price is $1800 shipped within the continental US - please PM me if interested.
I have not touched the other two, so they would need to be disassembled & all four re-assembled. All of the nuts & bolts seem to be in excellent condition & I made sure to bag & mark each wheel's bolts & nuts (I did quite a bit of research prior to taking them apart & I did it with care).
The centers are in very good condition - I had planned on refinishing / repainting them, though you could probably get away with using them as is.
The specs are:
18x8 et52
18x9.5 et47
These are a direct fit for most 944/964/993/996 cars (wide bodies may need a spacer)
Price is $1800 shipped within the continental US - please PM me if interested.
#2
Hi, I've been looking around for a nice set of these rims, and I happened to come across your for sale thread. So just to confirm these are OEM 3 peice wheels? and you have 4 new lips for them (2 for the 8" and 2 for the 9.5" ?) taht you would include in the sale? and where abouts in the states are you located? because depending I may decide to drive down from Canada to pick them up if I do decide 100% to buy them
#5
so.... are they still for sale by Nurburger or not? Cause I am under the impression that since no one responded to the for sale thread in 3 months that they are still for sale, if they are then I await a response if not then let me know so i can continue my search elsewhere
#6
He sold them. He is his response to me several months ago
"Matt - I sold them to Jim Dorociak, who will likely refinish them to better than new standards & sell them. You may want to contact him to let him know that you're interested. His email is: jdorociak@gmail.com
good luck...
Nick "
"Matt - I sold them to Jim Dorociak, who will likely refinish them to better than new standards & sell them. You may want to contact him to let him know that you're interested. His email is: jdorociak@gmail.com
good luck...
Nick "