Wheels for Silver 964
03-15-2010 | 12:40 PM
#16
Pro
Joined: Mar 2007
Posts: 524
Likes: 1
From: CT
03-15-2010 | 03:03 PM
#18
Pro
Joined: Mar 2007
Posts: 524
Likes: 1
From: CT
Their lawyers and/or insurance co likely insisted on the "for offroad use only".
These wheels were discussed a couple months ago;
https://rennlist.com/forums/showthre...ferrerid=51959
These wheels were discussed a couple months ago;
https://rennlist.com/forums/showthre...ferrerid=51959
03-15-2010 | 03:45 PM
#19
Nordschleife Master
Joined: Dec 2006
Posts: 5,405
Likes: 74
From: S.E. VA
Greg, I've seen similar legalese before.
On recollection, it's used for products looking to dodge emissions & safety regulators (e.g., cat bypasses and airbag-less steering wheels) where the customer knows (wink - wink) what it is that's being 'defeated' - or where there's a chance the product can be installed stupidly (e.g., restraint/rollbar systems).
So, what agency's being compromised/defeated, here?
To see it on wheels, for me, is puzzling.
(I would more anticipated seeing something as, "NOT intended for offroad/track use")
On recollection, it's used for products looking to dodge emissions & safety regulators (e.g., cat bypasses and airbag-less steering wheels) where the customer knows (wink - wink) what it is that's being 'defeated' - or where there's a chance the product can be installed stupidly (e.g., restraint/rollbar systems).
So, what agency's being compromised/defeated, here?
To see it on wheels, for me, is puzzling.
(I would more anticipated seeing something as, "NOT intended for offroad/track use")
03-15-2010 | 10:34 PM
#20
Thread Starter
Racer
Joined: Apr 2008
Posts: 369
Likes: 0
From: Silver Spring, MD
03-15-2010 | 11:03 PM
#21
Thread Starter
Racer
Joined: Apr 2008
Posts: 369
Likes: 0
From: Silver Spring, MD
03-15-2010 | 11:08 PM
#22
Thread Starter
Racer
Joined: Apr 2008
Posts: 369
Likes: 0
From: Silver Spring, MD
03-16-2010 | 04:37 PM
#24
Intermediate
Joined: Nov 2009
Posts: 33
Likes: 0
From: Chicago, IL
How bout your old ones??
I've gotten interested in updating my wheels from 5-spoke cup wheels (also silver) to a black center wheel. I guess it seems like I have too much silver. After reading all the wheel sizing threads, I want to stick with a 17" wheel, although that limits selection. After a good bit of searching, I came across this wheel, an HRE C70 from Wheel Enhancement. Kinda pricey though. I would get it in the 7.5 and 9.5 widths. I was wondering if by chance anyone else had gotten this wheel for their 964, particularly if another silver 964 had any pic's to show what it looked like. Any comments on the HRE wheels in general would also be appreciated. Or any other black center wheel suggestions too.
Thanks!
Thanks!
01-14-2011 | 10:14 PM
#25
Thread Starter
Racer
Joined: Apr 2008
Posts: 369
Likes: 0
From: Silver Spring, MD
I think I'm pointing towards the Zuffenhaus Fuchs repliicas, with the gloss black centers. Got some good info from Keith there. Very light wheels (<16 lbs) but the construction basis seems to be very strong. About 10 lbs lighter than my Cup II's, I think. Planning on 7.5" for 225/45's in front and 9's for 255/40's in rear. Fit comments? Anybody have photos of these on a silver 964? 
05-15-2013 | 09:08 AM
#27
Cruisin'
Joined: May 2013
Posts: 9
Likes: 0
