RS rear bumper pics
#1
Three Wheelin'
Thread Starter
RS rear bumper pics
Ive bought a rs rear bumper, but its a fibreglass copy and dosnt have the holes in it for the number plate lights.
So i need a few pics please, i wana make the holes in the correct place for the lights. Thanks in advance.
So i need a few pics please, i wana make the holes in the correct place for the lights. Thanks in advance.
Trending Topics
#8
Three Wheelin'
Thread Starter
Fitted my rs copy bumper today.
It was a complete pig to remove the original, every bolt seized in, every screw corroded!
Must of took me and my mate with a full workshop about 2 hours to get the thing off and ready to be re-fitted, had to grind allmost all the bolts off .
Then had to run up to porsch-apart and spend £70 on 3 new arms that hold the sides on.
Anyway after all the messing its on, and looks good
Need to finish the hole for the towing eye, need a bigger cone bit.
Anyway thanks for the pics they where a big help.
It was a complete pig to remove the original, every bolt seized in, every screw corroded!
Must of took me and my mate with a full workshop about 2 hours to get the thing off and ready to be re-fitted, had to grind allmost all the bolts off .
Then had to run up to porsch-apart and spend £70 on 3 new arms that hold the sides on.
Anyway after all the messing its on, and looks good
Need to finish the hole for the towing eye, need a bigger cone bit.
Anyway thanks for the pics they where a big help.
Last edited by 964russ; 10-02-2009 at 04:16 PM.
#11
Three Wheelin'
Thread Starter
The bumper is a fibreglass copy made by pro-9, it fits fine but didnt come with any cut outs for the lights or towing eye. But a fraction of the cost of an original.
The 7th is no good for me rich, iam in work all weekend .
I really wanted to go as well, maybe next time.
The 7th is no good for me rich, iam in work all weekend .
I really wanted to go as well, maybe next time.
#12
Three Wheelin'
Thread Starter
A couple of pics for Freedman to have a look at.
The holes for the lights still need a little more work, ill sort this out when it goes for paint.
Car is filthy, welsh dirt
The holes for the lights still need a little more work, ill sort this out when it goes for paint.
Car is filthy, welsh dirt
Last edited by 964russ; 10-09-2010 at 05:04 PM.
#14
Three Wheelin'
Looking Russy boy! Whats the quality of the fibreglass ones like?
I had 2 real RS rear sections for sale recent, and it seemed like people where saving their buck for these fibreglass ones.
I had 2 real RS rear sections for sale recent, and it seemed like people where saving their buck for these fibreglass ones.
#15
Three Wheelin'
Thread Starter
There ok Nski, just takes a little time to get them bob on.
The fibreglass is very thick, makin it strong and easy to work with.
I like your back bumper best, its US spec me thinks?
Its different like rs but not rs, works well with your small plate
The fibreglass is very thick, makin it strong and easy to work with.
I like your back bumper best, its US spec me thinks?
Its different like rs but not rs, works well with your small plate