Let's talk about C4 ride height some more
#17
Pro
Thread Starter
Join Date: Aug 2007
Location: Burnet, Texas (Central TX)
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Your car looks great!
Since the C2 and C4s share the same front and rear axle alignment specs there should not be any issues setting at RS specs.
I see you used RS ride height +5, but do you have the alignment specs, or do you recall if you used stock or RS specs? I plan to use RS specs as a minimum and may go a little more aggressive on camber, to maybe 1.5
Thanks for sharing the pics and the information.
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
I see you used RS ride height +5, but do you have the alignment specs, or do you recall if you used stock or RS specs? I plan to use RS specs as a minimum and may go a little more aggressive on camber, to maybe 1.5
Thanks for sharing the pics and the information.
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I finally found my official height/alignment specs:
Height:
LF/RF: 25 7/8 and 130mm
LR/RR: 25 3/8 and 223mm
Alignment:
Front
Camber: -0.75 left, -0.75 right
Caster: +4.5 left, +4.6 right
Toe in total: 0.06"
Rear:
Camber: -1.0 left, 1.0 right
Toe in total: 0.06"
It think these are less aggressive than RS spec.
Height:
LF/RF: 25 7/8 and 130mm
LR/RR: 25 3/8 and 223mm
Alignment:
Front
Camber: -0.75 left, -0.75 right
Caster: +4.5 left, +4.6 right
Toe in total: 0.06"
Rear:
Camber: -1.0 left, 1.0 right
Toe in total: 0.06"
It think these are less aggressive than RS spec.