slammed1000

first off i have did a search and ran through about every post for the last 2 years..

i would like to know what is available as a aftermaket shift **** and boot to work in the 964. the cars interior color has been changed but the **** and boot are still the beige/white color. i have noticed that all of the factory boots conform to a certain shape. can you make the aftermarket momo/sparco boot work and be retained to look like the factory boot. please show me your installs....
i have seen some of the pricey aftermarket porsche only applications and i wont pay the money they are asking...i just think thats highway robbery just because it has the "porsche" name involved..

CWay27

You might have done a search but.......

Here is what I found and did, remove old shifter/boot by prying side to side (the wire frame is sowed in the boot and boot is pressure fit in the center console) is and cut it to remove wire frame. Any momo or sparco with elastic at the bottom will work. Put the wire frame inside the new boot and press fit it in the center console one side at a time (passenger then driver).

Uber 911

I just picked this up from the UK, good price.

http://cgi.ebay.co.uk/PORSCHE-911-96...713.m153.l1262

carby

Good tip....

The pic on the FleaBay page is pretty foggy, is the real item OEM quality and did it include the shift pattern insert?

Amazing how cheap it is compared to the competition....

DLCrow

Sorry - misplaced the linnk, but I just bought one that was mentioned within the last couple of weeks in the 964 forum from this outfit via ebay - it's already on and great -

IC-T
Innovativ Car - Tech
Schuckertstr. 15
72766 Reutlingen
Tel: 07121 433 09 90
Fax: 07121 433 09 99
info@ict-schaltknauf.de

Dwane

http://cgi.ebay.com/PORSCHE-964-Lede...ayphotohosting

DLCrow

http://www.innovativcar-tech.de/inde...rsche-964.html

of course i found it just after posting the above reply!

bb964

Try here:
http://www.aglausa.com/p/home.html

newsboy

Has anyone installed the "innovativca" shift ****/boot. Does it come in colors other than black.How do you go about wiring the illuminated model?

Uber 911

I've used these before, leather is leather pretty much. They dont come with the shift pattern insert. When I've fitted mine I'll post some pics.

Ritter v4.0

These are very nice and look OEM- quality is high.

MassGuy

I made my own.

Of course I consider my car to be an outlaw........

DanielT

here is a nice one....if you like aluminum...

easttorks964cab

daniel, i want that gear **** to match my other ally interior bits, where did you get it matey?

chris

DanielT

sorry, I have no clue. It was on the car when I purchased it....
I have looked around myself, to see if I could find who makes it to no avail....

bummer.

but I do like it just about better than any other 964 ****. No more wear on the actual **** surface from you hand, like the stocker.