Scantool Diagnostic 19 pin Plug
#106
Rennlist Member
Got mine and warmfuzzies plugs through earlier in the week - again many thanks for this! Will make it easier to help people out at our UK 964 meets when I take the laptop and no need for messing around with bare wires now!
#107
Rennlist Member
Originally Posted by RicardoD
The 7 plugs Mojorizing is generously offering me will be available later on as part of finished "plug-n-play" scantool assemblies. So they will still end up in Rennlisters hands but as part of a larger group buy package for the guys who don't want to do the hardcore DiY soldering and enclosure work.
Kevin, major props to you.
Thanks
#109
Rennlist Member
Kevin,
I just got back from vacation and your package was in my pile of mail. It took me about 20 minutes to replace the old molex connectors with your plug and test it out. Worked like a charm!
Let me add my voice to the many who have thanked you for your efforts. I know you sold your time pretty cheaply to put these together and I hope it is some compensation to hear how much we appreciate the results.
Thanks again,
Jim G.
I just got back from vacation and your package was in my pile of mail. It took me about 20 minutes to replace the old molex connectors with your plug and test it out. Worked like a charm!
Let me add my voice to the many who have thanked you for your efforts. I know you sold your time pretty cheaply to put these together and I hope it is some compensation to hear how much we appreciate the results.
Thanks again,
Jim G.
#113
Addict
Rennlist Member
Rennlist Member
I just came across this ("19 pin Round Diagnostic Connector for Porsche") recently, for under $20, from a Canadian company Sensolutions:
#116
Rennlist Member
This is actually where Ricardo and I are sourcing our plugs, but be advised, this plug assembly will not actually fit in the 964 receptacle. We had to re-engineer portions of the backshell to make this one work.
Our OBD1Diagnostics tool is almost ready. Stay tuned!
Our OBD1Diagnostics tool is almost ready. Stay tuned!