Using a blowtorch
01-14-2006, 10:32 PM
#32
Super Duper Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Sure, now you tell me. 
Actually, I broke the bits by getting impatient and pushing too hard on the drill - the others just got dull so the fluid might have helped.
Dave - I am suspicious the valves were not adjusted.....unless there is a way to do it without removnig the cat.
Marc
Actually, I broke the bits by getting impatient and pushing too hard on the drill - the others just got dull so the fluid might have helped.
Dave - I am suspicious the valves were not adjusted.....unless there is a way to do it without removnig the cat.
Marc
