Notices
964 Forum 1989-1994
Sponsored by:
Sponsored by:

Will 996 rims fit my 93 RS America??

Thread Tools
 
Search this Thread
 
Old 08-09-2001, 03:11 PM
  #1  
AdamKWeinstein
Track Day
Thread Starter
 
AdamKWeinstein's Avatar
 
Join Date: Aug 2001
Location: Jupiter, Florida
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Question Will 996 rims fit my 93 RS America??

I currently run the following rims: front 7J17 55mm offset and rear 8J17 52 mm offset.

Although the 996 or Boxter front rims are the same (7J17 55mm), will 996 or Boxter rear rims (9J17 55mm offset) fit my car? Will I need spacers, and if so, what sise? If so, what size tires should I run?

Thanks in advance, Adam.
Old 08-09-2001, 03:34 PM
  #2  
Viken
Keeper of the Truth
Lifetime Rennlist
Member

 
Viken's Avatar
 
Join Date: May 2001
Location: So Cal
Posts: 6,486
Likes: 0
Received 5 Likes on 5 Posts
Post

Yes, those wheels should fit your RS America fine. In fact, Porsche did offer am original 9" x 17" "Cup" wheel for the 964 as well:

965.362.128.00 - 9" x 17" ET55
Old 08-09-2001, 03:50 PM
  #3  
MelissaM
Addict
Rennlist Member

 
MelissaM's Avatar
 
Join Date: May 2001
Location: San Jose, CA
Posts: 424
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

I have a set of Boxster rims (7" front, 8.5" rear) that fit my narrow bodied C2 perfectly!

Personally, I feel more comfortable with the 8.5" rims in the back rather than the 9", since I have more clearance between the wheel and the oil lines. OTOH, many people run 9" rims on their cars with no problems at all. Just check the clearance -- better safe than sorry.

Good luck!

-- Melissa
Old 08-09-2001, 04:36 PM
  #4  
Christoph Branden
AutoX
 
Christoph Branden's Avatar
 
Join Date: Jul 2001
Location: Eastern Washington State
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Wink

I put a set of 17 turbo twist "technology" 993 wheels on my car and they fit great. 8" rear 7.5 in the front.
Old 08-09-2001, 05:28 PM
  #5  
Viken
Keeper of the Truth
Lifetime Rennlist
Member

 
Viken's Avatar
 
Join Date: May 2001
Location: So Cal
Posts: 6,486
Likes: 0
Received 5 Likes on 5 Posts
Post

Originally posted by Christoph Branden:
<STRONG>I put a set of 17 turbo twist "technology" 993 wheels on my car and they fit great. 8" rear 7.5 in the front. </STRONG>
These are not factory wheels and their offsets differ from those discussed above.
Old 08-09-2001, 06:59 PM
  #6  
GeoC2cab
Racer
 
GeoC2cab's Avatar
 
Join Date: Jun 2001
Location: Butler,N.J., USA
Posts: 324
Likes: 0
Received 3 Likes on 3 Posts
Post

high,
I am currentlly running the "cup" rims Viken has mentioned, 9"x17" ET55 with the same part number on the rear of my '91 and they fit on no problem, theres even a little room for spacers if you wanted too, I dont use em.
peace****Geo****C2cab
Old 08-10-2001, 01:26 AM
  #7  
J richard
Rennlist Member
 
J richard's Avatar
 
Join Date: Jun 2001
Location: Arizona
Posts: 3,636
Received 39 Likes on 28 Posts
Thumbs up

I am running a set of 17" factory cup wheels for the track. 7's and 9's. Double check the rear fenders, many of the 93's (including mine) came with factory rolled rear fenders which will give you an extra bit of clearance in the rear. Go check out the RS America Web page and register while you're at it. (if you haven't already...)rsamerica.net
Old 08-15-2001, 09:37 AM
  #8  
AdamKWeinstein
Track Day
Thread Starter
 
AdamKWeinstein's Avatar
 
Join Date: Aug 2001
Location: Jupiter, Florida
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks for all the responses. I picked up the car last night and to my chagrin, the car runs on factory 996 rims (front 7J17 55mm offset and rear 9J17 55 mm offset). As J richard noted, my car also is an early 93 RS America (#50) and has the factory rear fender rolled.

Just in case anyone else is looking for data points, one set of rims carries 245/45R17 and 275/40R17 Hoosiers and the other set has 235/40ZR17 and 275/40R17 G-Force tires.

Thanks again, Adam.



Quick Reply: Will 996 rims fit my 93 RS America??



All times are GMT -3. The time now is 01:07 AM.