How much trouble am I in? Belt Pully bolts
#1
Advanced
Thread Starter
Join Date: Apr 2002
Location: Illinois
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
![Red face](https://rennlist.com/forums/images/icons/icon11.gif)
Was changing the belt for the first time since I have owned the car and ran into a problem.
Of the 3 bolts that hold the final pully to the fan, only one will loosen. I am using a 5m hex socket, and I even tried the "tapping it to loosen it" and the penetrating oil tricks. But these bolts seem to be a little bigger than 5m holes. Now the hex socket is about to stip out the holes on two of them, if it hasn't already. Now what? Any help is appreciated!
Thanks
Ed
'92 C2 Cab
Of the 3 bolts that hold the final pully to the fan, only one will loosen. I am using a 5m hex socket, and I even tried the "tapping it to loosen it" and the penetrating oil tricks. But these bolts seem to be a little bigger than 5m holes. Now the hex socket is about to stip out the holes on two of them, if it hasn't already. Now what? Any help is appreciated!
Thanks
Ed
'92 C2 Cab
#2
Track Day
Join Date: Jul 2002
Location: Papillion Nebraska
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
I also did this last week and if I remember I had to use a open end wrench to get to those nuts because when they are tight a socket would not get enough of a bite on the nut. Thats what worked for me sorry I don't remember what size wrench. Brian